Traxxas Bulkhead Frnt L&R Halves Diff Retainer 4 X 14Mm Bc S (4) Rev

This is the Front Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic construction
Rocker shafts preinstalled

INCLUDES:
Front bulkhead cuts in half Part #5330
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Installation on the Traxxas Revo

Many others have bought this product along with the product that you are presently checking out.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FEATURES:
Totally assembled
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping areas from dirt
Attaches to the differential with one screw pin
Works on the front or back, right or left of automobile

INCLUDES:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Instruction sheet

REQUIRES:
Setting up on chassis

Frequently bought with the product that you are presently checking out.

Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Rear Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic construction
Rocker shafts preinstalled

INCLUDES:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Installation on the Traxxas Revo

This product praises the main item below.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building and construction
Blue and Black in Color

INCLUDES:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Instruction sheet

REQUIRES:
Two plans required to finish truck

This is a superb addition to the product presently being gone over.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for use on the E-Revo

FEATURES:
Stainless Steel bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 6x13x5mm ball bearings Part #5180

SPECS:
Inside diameter: 6mm (0.24")
Outdoors diameter: 13mm (0.51")
Width: 5mm (0.20")

Want one more great product to enhance the above mentioned product?

Skid Plate Set Front & Rear Revo Summit

This is the Front and Rear Skid Plates for the Traxxas Revo.

FEATURES:
Black plastic construction
Front skid plate is a two-piece design
Rear skid plate is a one-piece design

INCLUDES:
Front and read skid plates Part #5337
(8) 3X10mm button head screws Part #2577
(1) 3X30mm button head screws Part #2582

REQUIRES:
Installation on the Traxxas Revo

This product is regularly bought with the above mentioned product.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for use with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

INCLUDES:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

Want one more great product to enhance the above mentioned product?

E-Revo Body Prographix

    This is a PROGRAPHIX Body for the Traxxas E-Revo
Covers and Safeguards the Vehicle.

FEATURES:
Lexan construction
Pre-painted graphics
Body mount holes pre-drilled
Pre-cut
Protective film covers outside of body after finish and is removed
    after conclusion of paint task

INCLUDES:
One painted graphics E-Revo Body
One decal set

REQUIRES:
Lexan safe spray or brush-on paint
Traxxas E-Revo

SPECS:
Length: 500mm (19.7")
Width: 185mm (7.28")
Height: 125mm (4.92")

COMMENT:
Graphics are pre-painted. Requires paint and final
decal application.