Traxxas Wheelie Bar Arm/Connector

This is the Wheelie Bar Arm for the T-Maxx 3.3.

FUNCTIONS:
4 snap-in adjustment positions to control degree of wheelie action
    quickly detachable if extra control isn't required
Constructed of solidified plastic, black in color

CONSISTS OF:
Wheelie Bar Arm with 4 Shoulder Screws, TRAC3642

NEEDS:
Securing to chassis

REMARKS:
For the 3.3 variation only.
Does not consist of Wheels and Axles, order TRAC9576 if required.

Many others have acquired this thing along with the thing that you are currently reading about.

Wheelie Bar Blue W/Rbbr Wheels

These are the Rubber Tires and Wheels for the
Wheelie Bar on the Traxxas Maxx and Jato Wheelie Bars.

FEATURES:
Machined blue aluminum ball bearing equipped wheels
Rubber Tires

CONSISTS OF:
Two rubber tires, 4 5x8mm ball bearings, two blue aluminum wheels

NEEDS:
Attaching to wheelie bar

This thing praises the above discussed thing.

Stampede 4X4 Wheelie Bar Mount Skidplate-Rear

This is the Wheelie Bar Mount and Back Skidplate
for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite building
Mount holds wheelie bar wheels in place and skidplate safeguards rear
    of chassis from damage

CONSISTS OF:
Wheelie Bar Mount and Back Skidplate

NEEDS:
Securing to rear of chassis

Right here is an additional thing that praises the thing being discussed.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, covered
Anodized black with white springs
Totally put together

CONSISTS OF:
Four fully put together shocks with white springs
Mounting hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and putting together onto the design

Get this thing to enhance the one you read around.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas automobiles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building

CONSISTS OF:
Two hex hubs
Four axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These hubs could be used with other automobiles using the same
    pin/hex design. These hubs Will Not work on the T-Maxx or E-Maxx.

Many others have acquired this thing along with the thing that you are currently reading about.

3Mm Nyl Lock Nuts/12

These are 3mm Nylon Locking Nuts from Traxxas.

FEATURES:
Long lasting metal building
Nylon inserts

CONSISTS OF:
(12) Lock Nuts

SPECIFICATIONS:
Size: 3mm

This thing is frequently acquired with the above discussed thing.

Wheels (4) Axles (2) (Wheelie

These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx.

FUNCTIONS:
Constructed of tough plastic
Axles constructed of steel

CONSISTS OF:
Four wheels and two axles

NEEDS:
Setting up on wheelie bar

SPECIFICATIONS:
Thickness: 0.39" (10mm)
Size: 1.02" (26.1mm)

REMARKS:
Wheelie Bar Arm, TRAC9574
Complete Wheelie Bar, TRAC9575
Wheelie Bar Frame, TRAC9577