Traxxas Wheels (4) Axles (2) (Wheelie

These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx.

FUNCTIONS:
Constructed of difficult plastic
Axles built of steel

CONSISTS OF:
4 wheels and 2 axles

NEEDS:
Setting up on wheelie bar

SPECIFICATIONS:
Thickness: 0.39" (10mm)
Diameter: 1.02" (26.1mm)

REMARKS:
Wheelie Bar Arm, TRAC9574
Complete Wheelie Bar, TRAC9575
Wheelie Bar Frame, TRAC9577

Several others have purchased this item together with the item that you are presently reading about.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Equipment for the Traxxas E-Maxx Truck.
This is the gear which is attached straight to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

CONSISTS OF:
One 14 tooth Pinion Equipment
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are used on the E-Maxx double motor
    set-up.

Below is a fantastic item that many others have purchased the same time.

Wheelie Bar Arm/Connector

This is the Wheelie Bar Arm for the T-Maxx 3.3.

FUNCTIONS:
4 snap-in adjustment positions to manage degree of wheelie action
    quickly detachable if additional control isn't needed
Constructed of solidified plastic, black in color

CONSISTS OF:
Wheelie Bar Arm with 4 Shoulder Screws, TRAC3642

NEEDS:
Attaching to chassis

REMARKS:
For the 3.3 variation only.
Does not consist of Wheels and Axles, order TRAC9576 if needed.