Traxxas Spring Shock White GTR Long 0.892 Blue (2)

This is the set of Traxxas Long GTR Shock Springs
with 0.892 Blue Compression Rate.

FEATURES:
Steel building and construction, white in color
Dab of paint on end of spring shows compression rate

INCLUDES:
Two Long 0.892 Blue Rate GTR Shock Springs

SPECS:
Length: 1.8" (45mm)
Wire Size: 0.043" (1.1mm)

Several others have actually purchased this thing along with the thing that you are presently reading about.

Spring Shock White Gtr Xxlong 1.004 Rate Blue (1 Pair)

This is the set of Traxxas Bonus Bonus Long GTR Shock Springs
with 1.004 Blue Compression Rate.

FEATURES:
Steel building and construction, white in color
Dab of paint on end of spring shows compression rate

INCLUDES:
Two Bonus Bonus Long 1.004 Blue Rate GTR Shock Springs

SPECS:
Length: 2.2" (56mm)
Wire Size: 0.043" (1.1mm)

You will certainly like this product if you have the product earlier pointed out.

Shocks, Gtr Long Hard-Anodized, Ptfe-Coated Bodies With Tin Shaf

This is a set of Long Traxxas GTR Shocks.

FEATURES:
Hard anodized PTFE aluminum bodies
TiN coated shafts

INCLUDES:
Two Long Traxxas GTR Shocks
Bottle of Silicone Shock Oil

REQUIRES:
Springs of modeler's option

SPECS:
Length: 3.3" (84mm) from upper and lower installing hole centers

Get this thing to improve the one you are reading about.

Shocks, Gtr Xx-Long Hard Anodized, Ptfe Coated Bodies W/ Tin Sha

This is a set of XX-Long Traxxas GTR Shocks.

FEATURES:
Hard anodized PTFE aluminum bodies
TiN coated shafts

INCLUDES:
Two XX-Long Traxxas GTR Shocks
Bottle of Silicone Shock Oil

REQUIRES:
Springs of modeler's option

SPECS:
Length: 3.9" (100.5mm) from upper and lower installing hole centers

The below thing additionally sets actually well with the thing being reviewed.

Motor Heat Sink

This is the initial replacement motor heatsink for the Traxxas Villain IV.
AXY
4/8/92

You will certainly like this product if you have the product earlier pointed out.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Several others have actually purchased this thing along with the thing that you are presently reading about.

Suspension Arms Guards Front Stampede 4X4

These are the Front Suspension Arm Guards for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite plastic building and construction
Black in color

INCLUDES:
Two front suspension arm guards
Two guard spacers
Two hollow balls
Eight 3x16mm button head cap screws

REQUIRES:
Installation onto front suspension