Traxxas Suspension Arms Guards Front Stampede 4X4

These are the Front Suspension Arm Guards for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite plastic building
Black in color

CONSISTS OF:
Two front suspension arm guards
Two guard spacers
Two hollow balls
8 3x16mm button head cap screws

NEEDS:
Installation onto front suspension

This item is regularly acquired with the above mentioned item.

Stampede 4X4 Suspension Arm Guards Rear

This is the Rear Suspension Arm Guards for the Stampede and Slash 4x4

FEATURES:
Black plastic building

CONSISTS OF:
Rear suspension arm guards (2)
Guard spacers(2)
Hallow Balls (2)
3x16mm BCS (2)

NEEDS:
Installation on car

Below is a wonderful item that many others have purchased the same time.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

NEEDS:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

REMARKS:
Also offered in Blue (RPMC0705)

Frequently acquired with the item that you are presently reviewing.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Heavy Responsibility Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Blue in color
Plastic constrution

CONSISTS OF:
(2) Front/Rear A-Arms

NEEDS:
Installation on front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

REMARKS:
Also offered in Black (RPMC0702)

Below is a wonderful item that many others have purchased the same time.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs permit a wide variety of bodies
    to be used consisting of rally car bodies
Constructed of nylon, black in color
Screw-on body install system gets rid of metal clips

CONSISTS OF:
Front and Rear Body Mounts and Publishes with Installing Hardware

Below is another item that compliments the item being reviewed.

Spring Shock White GTR Long 0.892 Blue (2)

This is the set of Traxxas Long GTR Shock Springs
with 0.892 Blue Compression Rate.

FEATURES:
Steel building, white in color
Dab of paint on end of spring suggests compression rate

CONSISTS OF:
Two Long 0.892 Blue Rate GTR Shock Springs

SPECS:
Length: 1.8" (45mm)
Wire Diameter: 0.043" (1.1mm)

The listed below item likewise pairs really well with the item being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Below is a wonderful item that many others have purchased the same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

CONSISTS OF:
Two Ball Bearings

NEEDS:
Assembly to car

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are used to support the Main Clutch (one required).