Traxxas 10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

CONSISTS OF:
2 Ball Bearings

NEEDS:
Assembly to automobile

SPECIFICATIONS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Primary Clutch (one needed).

This item praises the main item here.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Want an additional wonderful item to enhance the above discussed item?

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt guards

CONSISTS OF:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside diameter: 6mm
Outside diameter: 12mm
Width: 4mm

COMMENTS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

Below is an additional item that praises the item being talked about.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Building
Blue Rubber Sealed

CONSISTS OF:
2 8mm x 16mm Rubber Sealed Bearings

NEEDS:
Assembly onto Vehicle

SPECIFICATIONS:
Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Thickness: 5mm (0.19")

You will certainly enjoy this thing if you have the thing above stated.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Hub Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Building
Blue Rubber Sealed

CONSISTS OF:
2 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings

NEEDS:
Assembly onto Vehicle

SPECIFICATIONS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Thickness: 4mm (0.15")

COMMENTS:
These are for the Within the Wheel Centers, the Truck Needs
Four Overall of these Bearings.

Frequently gotten with the item that you are presently checking out.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Equipment
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building
Black in color
.8 Module pitch

CONSISTS OF:
One 54T 0.8 Pitch Spur Equipment

NEEDS:
Assembly onto automobile

The listed below item additionally sets truly well with the item being talked about.

Gear Set, Differential

This is the Differential Equipment Set for the Traxxas Revo and E-Maxx.

FEATURES:
Steel building

CONSISTS OF:
2 Output Equipments
2 Spider Equipments
Spider Gear Shaft and Diff Provider Assistance
Direction Sheet

NEEDS:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Want an additional wonderful item to enhance the above discussed item?

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building
Steel 10x15x4mm ball bearing with blue rubber seal
Used on slipper shaft

CONSISTS OF:
One aluminum adapter
One 10x15x4mm ball bearing

NEEDS:
Setup on to slipper shaft
Remaining clutch pieces

Below is an additional item that praises the item being talked about.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for usage with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

CONSISTS OF:
One differential ring equipment
One pinion equipment

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)