Traxxas Gear Set, Differential

This is the Differential Gear Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel building and construction

CONSISTS OF:
Two Output Equipments
Two Spider Gears
Spider Gear Shaft and Diff Carrier Assistance
Guideline Sheet

REQUIRES:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Regularly acquired with the thing that you are presently checking out.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for usage with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

Here is a great thing that numerous others have actually bought at the very same time.

Carrier, Differential (Heavy D

This is the Strong Carrier Differential for usage on the
Traxxas Summit Truck RTR

FUNCTIONS:
Nylon building and construction
Black in color

CONSISTS OF:
One Strong Differential Carrier
One Front and Back Linkage Arm
One Differential Fork
Two X-Ring Gaskets
One Ring Gear Gasket
Two Bushings
One 6.5x10x0.5mm Washer

REQUIRES:
Setup on the automobile

This thing praises the above talked about thing.

Gear, Locking Differential Out

This is the Locking Differential Ouput Gear for usage on the
Traxxas Summit Truck RTR

FUNCTIONS:
Steel building and construction

CONSISTS OF:
One Locking Differential Output Gear
One Differential Slider
One 3x12mm Screwpin

REQUIRES:
Setup on the automobile

This thing praises the main item right here.

Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Carrier/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Carrier
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

CONSISTS OF:
One Diff Carrier
Two Blue Rubber Shaft Gaskets
One Black Rubber Diff Carrier Gaskets
One Gray Washer

REQUIRES:
Assembly to automobile

This thing praises the main item right here.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Building
Blue Rubber Sealed

CONSISTS OF:
Two 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Automobile

SPECS:
Inner Size: 8mm (0.31")
Outer Size: 16mm (0.62")
Thickness: 5mm (0.19")

This thing praises the above talked about thing.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Assembly to automobile

SPECS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one needed).

The listed below thing likewise pairs actually well with the thing being talked about.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) ball bearings, Part #5117

SPECS:
Inside diameter: 6mm
Outdoors diameter: 12mm
Width: 4mm

COMMENTS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

This is a wonderful addition to the thing presently being talked about.

Carrier, Differential Heavy Du

This is the Carrier Differential for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Replaces used diff carriers gaskets and spacers

CONSISTS OF:
Diff Carrier and Gaskets, TRAC5381
Steel Spider Gear Braces (not utilized with Revo)
Guideline sheet

REQUIRES:
Disassembly of differential, setting up brand-new parts and filling up with
    modeler's choice of diff lube
10K (TRAC5135) 50K (TRAC5137)
30K (TRAC5136) stock weight Complete set (TRAC9136)