Traxxas Half Shaft Set, Long (Plastic

These are the Long Half Shafts for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Plastic building and construction
Black in color

CONSISTS OF:
Two Long Half Shaft Sets, internal splined half shafts and external
    half shafts with glued boot

NEEDS:
Setup on the automobile

SPECIFICATIONS:
Length: 130mm (5")
Size: 17.3mm (0.68")

This thing is often gotten with the above mentioned thing.

Half Shaft Set, Short (Plastic

These are the Short Half Shafts for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Plastic building and construction
Black in color

CONSISTS OF:
Two Short Half Shaft Sets, internal splined half shafts and external
    half shafts with glued boot

NEEDS:
Setup on the automobile

SPECIFICATIONS:
Length: 117mm (4.6")
Size: 17.15mm (0.68")

The listed below thing likewise sets actually well with the thing being discussed.

Stub Axle, Cv Style (Machined

This is the CV Design Stub Axle for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Machined steel building and construction
CV style

CONSISTS OF:
One CV Design Stub Axle
One Cross Pin
One Drive Pin
One Set Screw

NEEDS:
Setup on the automobile

SPECIFICATIONS:
Length: 49mm (1.9")

Want an additional excellent thing to compliment the above mentioned thing?

Diff CV Output Drive/Screw Pin/Cross Pin/Drive Pin

This is the Differential CV Output Drive Set for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Steel building and construction

CONSISTS OF:
Differential CV Output Drive
Screw Pin with Threadlock
Cross Pin
Drive Pin
Set Screw

NEEDS:
Setup on the automobile

This thing is often gotten with the above mentioned thing.

Gear, Locking Differential Out

This is the Locking Differential Ouput Gear for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Steel building and construction

CONSISTS OF:
One Locking Differential Output Gear
One Differential Slider
One 3x12mm Screwpin

NEEDS:
Setup on the automobile

This thing is often gotten with the above mentioned thing.

Gear Set, Differential

This is the Differential Gear Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel building and construction

CONSISTS OF:
Two Output Gears
Two Spider Gears
Spider Gear Shaft and Diff Carrier Assistance
Instruction Sheet

NEEDS:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Below is a excellent thing that several others have actually purchased the exact same time.

20-T Pinion Gear 32 Pitch

This is a Traxxas 20 Tooth Pinion Gear for a 5mm Motor Shaft.

FEATURES:
Silver in color, steel building and construction

CONSISTS OF:
20 Tooth Pinion Gear with 4mmx3.5mm Set Screw

NEEDS:
Setup on motor shaft

SPECIFICATIONS:
Outer Size: 15.5mm (0.61")
Inner Size: 5mm (0.20")

You will love this item if you have the item previously discussed.

Wheel Wrench, 17Mm Splined

This is the 17mm Splined Wheel Wrench from Traxxas.

FEATURES:
Nylon building and construction, black in color
Compatible with the 17mm splined nuts utilized on many Traxxas cars

CONSISTS OF:
17mm splined wheel wrench

This thing is often gotten with the above mentioned thing.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building and construction
Blue and Black in Color

CONSISTS OF:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Instruction sheet

NEEDS:
Two plans needed to finish truck