Traxxas Half Shaft Set, Short (Plastic

These are the Short Half Shafts for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Plastic construction
Black in color

CONSISTS OF:
Two Short Half Shaft Sets, internal splined half shafts and external
    half shafts with glued boot

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Length: 117mm (4.6")
Diameter: 17.15mm (0.68")

This is a wonderful addition to the item presently being discussed.

Half Shaft Set, Long (Plastic

These are the Long Half Shafts for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Plastic construction
Black in color

CONSISTS OF:
Two Long Half Shaft Sets, internal splined half shafts and external
    half shafts with glued boot

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Length: 130mm (5")
Diameter: 17.3mm (0.68")

This item is often acquired with the above mentioned item.

Diff CV Output Drive/Screw Pin/Cross Pin/Drive Pin

This is the Differential CV Output Drive Set for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Steel construction

CONSISTS OF:
Differential CV Output Drive
Screw Pin with Threadlock
Cross Pin
Drive Pin
Set Screw

REQUIRES:
Setup on the automobile

This item praises the main item below.

Stub Axle, Cv Style (Machined

This is the CV Style Stub Axle for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Machined steel construction
CV style

CONSISTS OF:
One CV Style Stub Axle
One Cross Pin
One Drive Pin
One Set Screw

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Length: 49mm (1.9")

Lots of others have actually acquired this item in addition to the item that you are presently reading about.

Gear Set, Differential

This is the Differential Gear Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel construction

CONSISTS OF:
Two Output Gears
Two Spider Gears
Spider Gear Shaft and Diff Carrier Support
Instruction Sheet

REQUIRES:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Lots of others have actually acquired this item in addition to the item that you are presently reading about.

Gear, Locking Differential Out

This is the Locking Differential Ouput Gear for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Steel construction

CONSISTS OF:
One Locking Differential Output Gear
One Differential Slider
One 3x12mm Screwpin

REQUIRES:
Setup on the automobile

Want an additional fantastic item to enhance the above mentioned item?

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for use with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

Right here is a fantastic item that several others have actually bought at the very same time.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building
Blue and Black in Color

CONSISTS OF:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Instruction sheet

REQUIRES:
Two packages had to complete truck

Want an additional fantastic item to enhance the above mentioned item?

20-T Pinion Gear 32 Pitch

This is a Traxxas 20 Tooth Pinion Gear for a 5mm Motor Shaft.

FEATURES:
Silver in color, steel construction

CONSISTS OF:
20 Tooth Pinion Gear with 4mmx3.5mm Set Screw

REQUIRES:
Setup on motor shaft

SPECIFICATIONS:
Outer Diameter: 15.5mm (0.61")
Inner Diameter: 5mm (0.20")