RPM Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

CONSISTS OF:
2 Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Density: 0.31" (8mm)

COMMENTS:
Likewise readily available in Blue (RPMC0705)

Here is a terrific product that several others have bought at the exact same time.

Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, coated
Anodized black with white springs
Completely assembled

CONSISTS OF:
4 completely assembled shocks with white springs
Mounting hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the design

This product is often purchased with the above mentioned product.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

This product is often purchased with the above mentioned product.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

CONSISTS OF:
Front driveshaft assembly
Screw pin

NEEDS:
Setup on car

This product compliments the above discussed product.

3 X 15Mm Button Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building and construction, Black in color
Utilized on the Traxxas Revo monster truck, can also be used in any
    application where a 3x15mm button head screw is needed

CONSISTS OF:
6 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Diameter: 3mm

You will certainly like this item if you have the item above pointed out.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Long lasting steel building and construction
Silver in color

CONSISTS OF:
4 51.5mm pins
4 30mm pins

NEEDS:
Setup on the Slash 4x4

Get this product to improve the one you read about.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Blue in color
Plastic constrution

CONSISTS OF:
(2) Front/Rear A-Arms

NEEDS:
Setup on front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Density: 0.31" (8mm)

COMMENTS:
Likewise readily available in Black (RPMC0702)

This product compliments the main item here.



Racers Edge 7.4V 25C 5000 Race Battery hardwired W/TRX HC Plug. Racers Edge battery is lighter than standard Ni-Cd or Ni-Mh batteries while providing improved efficiency and run times. It utilizes the same balancing connection as Align or Electrifly battery chargers. Make sure to utilize a voltage cut off if your speed control does not come geared up with one. ONLY USAGE A CHARGER PARTICULARLY FOR Li-Poly cells!!!

Frequently purchased with the product that you are currently reviewing.

Front Bulkhead For Slash 4X4 Lcg And Rustler 4X4, Black

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Suitable with the LGC chassis just**
**will not work with the standard chassis variation of the Slash 4x4.**

FEATURES:
Two-piece design enables front end of car to be eliminated without
    having to eliminate the bellcranks
Side dirt guards mix with the chassis and aid safeguard the
    guiding servo and bellcrank location from dirt
Constructed of engineering grade nylons, black in color

CONSISTS OF:
Two-Piece Front Bulkhead with Mounting Hardware and Guideline Sheet