Traxxas Motor Heat Sink

This is the original replacement motor heatsink for the Traxxas Bad guy IV.
AXY
4/8/92

Lots of others have gotten this thing in addition to the thing that you are presently reading about.

Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Basic setup needs only snapping the fan housing on the
ESC and plugging in the adapter on the ESC to the fan

CONSISTS OF:
One Cooling Fan System with setup sheet

NEEDS:
Installation following the included guidelines

SPECIFICATIONS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) including clips - .47" (12mm) not including clips

Below is a wonderful thing that several others have bought at the exact same time.

Tqi 2.4Ghz 5-Channel Micro Receiver (W/ Telemetry)

This is the Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry.

FEATURES:
Compatible with all Traxxas models that include the TQi telemetry
    system
May also be utilized with all existing Traxxas TQ 2.4GHz transmitters
    with black cases and satin chrome or black steering wheels

CONSISTS OF:
Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry

SPECIFICATIONS:
Dimensions: 1.5 x 1.02 x 0.43" (38 x 26 x 11mm)
Weight: 0.35oz (10g)

You will certainly enjoy this product if you have the product just above stated.

Cc Blower 15 Series For 1/8 Motors

This is the Motor Cooling Blower Fan and Shroud from Castle Creations.

FEATURES:
Fits motors with outside size between 1-1/2 and 1-7/8"
    (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650
Connecteds into receiver and drops motor temperature as much as 30°
One year restricted warranty through producer start at date of
    purchase

CONSISTS OF:
Fan with wire and adapter, shroud and two zip ties

NEEDS:
Connecting to motor can and connecteding into receiver

SPECIFICATIONS:
Length: 49mm
Width: 44.5mm
Height: 44.5mm
Wire Length: (9.5")

You will certainly enjoy this product if you have the product just above stated.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs enable a wide variety of bodies
    to be utilized including rally vehicle bodies
Constructed of nylon, black in color
Screw-on body mount system removes metal clips

CONSISTS OF:
Front and Rear Body Mounts and Posts with Installing Hardware

Lots of others have gotten this thing in addition to the thing that you are presently reading about.



This is a set of Pro-Line Masher M2 2.8" All Surface Front or Rear Tires
installed to Black Desperado Wheels.

FEATURES:
Fits the rear of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electric Stampede and Rustler
front and rear of the Stampede 4x4
Chevron style tread for excellent traction on rough surface
Side tread has a hook design that craters the dirt for exceptional
    side traction
M2 (soft) substance
Nylon building six spoke wheel with molded-in beadlock ring

CONSISTS OF:
Two Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECIFICATIONS:
Wheel Diameter: 2.8" (71mm)
Overall Diameter: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm