Traxxas Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Basic installation needs only snapping the fan housing on the
ESC and plugging in the connector on the ESC to the fan

CONSISTS OF:
One Cooling Fan System with installation sheet

REQUIRES:
Installation following the consisted of directions

SPECIFICATIONS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) consisting of clips - .47" (12mm) not consisting of clips

Numerous others have actually purchased this product together with the product that you are currently reading about.

Heat Sink Velineon 380 Motor Brushless, Aluminum Blue-Ano

This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor.

FEATURES:
Aluminum building and construction, anodized blue in color

CONSISTS OF:
Aluminum Heat Sink with tube of Thermal Paste and Directions

Get this product to improve the one you are reading around.

Motor Heat Sink

This is the initial replacement motor heatsink for the Traxxas Villain IV.
AXY
4/8/92

Numerous others have actually purchased this product together with the product that you are currently reading about.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be used on Traxxas or most other brands of cars.

FEATURES:
Metal clips are silver in color

CONSISTS OF:
Twelve body clips

SPECIFICATIONS:
Length: aprrox. 7/8"

Frequently purchased with the product that you are currently reading about.

Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, layered
Anodized black with white springs
Completely assembled

CONSISTS OF:
Four fully assembled shocks with white springs
Installing hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and putting together onto the model

This product compliments the above reviewed product.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs allow a wide array of bodies
    to be used consisting of rally automobile bodies
Constructed of nylon, black in color
Screw-on body install system gets rid of metal clips

CONSISTS OF:
Front and Rear Body Mounts and Posts with Installing Hardware

Numerous others have actually purchased this product together with the product that you are currently reading about.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the equipment which is connected directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

CONSISTS OF:
One 14 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This equipment is only one of two which are used on the E-Maxx double motor
    set-up.

You will certainly like this product if you have the product above discussed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

REMARKS:
Also offered in Blue (RPMC0705)