Traxxas Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum construction

INCLUDES:
2 hex hubs
4 axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Density: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

COMMENTS:
These hubs could be used with other vehicles making use of the very same
    pin/hex design. These hubs Will Not deal with the T-Maxx or E-Maxx.

This is a superb enhancement to the thing presently being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

The listed below thing additionally pairs truly well with the thing being talked about.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Protected with blue rubber seals

INCLUDES:
2 Ball Bearings

NEEDS:
Assembly to car

SPECIFICATIONS:
Inner Size: 10mm
Outer Size: 15mm
Side Density: 4mm

COMMENTS:
These bearings are used to support the Primary Clutch (one required).

Want an additional wonderful thing to compliment the above mentioned thing?

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a pair of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel construction

INCLUDES:
2 Front Driveshafts

This thing praises the above talked about thing.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a pair of optional Back Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel construction

INCLUDES:
2 Back Driveshafts

Get this thing to improve the one you read around.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs allow a wide variety of bodies
    to be used suching as rally automobile bodies
Constructed of nylon, black in color
Screw-on body install system eliminates metal clips

INCLUDES:
Front and Rear Body Installs and Publishes with Installing Hardware

Below is a wonderful thing that many others have bought at the very same time.



This is a set of Pro-Line Masher M2 2.8" All Terrain Front or Rear Tires
installed to Black Desperado Wheels.

FEATURES:
Fits the rear of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electrical Stampede and Rustler
front and rear of the Stampede 4x4
Chevron style tread for good traction on rough terrain
Side tread has a hook design that craters the dirt for exceptional
    side traction
M2 (soft) compound
Nylon construction six spoke wheel with molded-in beadlock ring

INCLUDES:
2 Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECIFICATIONS:
Wheel Size: 2.8" (71mm)
Total Size: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm

Below is a wonderful thing that many others have bought at the very same time.

Wheelie Bar Arm/Connector

This is the Wheelie Bar Arm for the T-Maxx 3.3.

FUNCTIONS:
4 snap-in modification positions to control degree of wheelie action
    easily removable if added control isn't really required
Constructed of solidified plastic, black in color

INCLUDES:
Wheelie Bar Arm with four Shoulder Screws, TRAC3642

NEEDS:
Attaching to chassis

COMMENTS:
For the 3.3 version only.
Does not include Wheels and Axles, order TRAC9576 if required.