Traxxas Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Back Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic building
Rocker shafts preinstalled

INCLUDES:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Installation on the Traxxas Revo

The below thing additionally pairs really well with the thing being gone over.

Chassis, E-Revo & Summit/ Foam

This is the Chassis for the Traxxas E-Revo 4WD Monster Truck RTR

FEATURES:
Nylon building
Installed foam pads
Grey in color
Also fits the Traxxas E-Revo Brushless and Traxxas Summit with minor
    modification

INCLUDES:
One Chassis with foam pads
Instruction sheet for use with E-Revo Brushless and Summit

REQUIRES:
Installation of all other parts

SPECIFICATIONS:
Length: 434mm (17")
Width: 150mm (5.9")
Height: 38mm (1.5")

Right here is another thing that compliments the thing being gone over.

Bulkhead Frnt L&R Halves Diff Retainer 4 X 14Mm Bc S (4) Rev

This is the Front Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic building
Rocker shafts preinstalled

INCLUDES:
Front bulkhead cuts in half Part #5330
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Installation on the Traxxas Revo

This is a amazing addition to the thing currently being gone over.

Frnt & Rr Body Mounts Revo

This is the Front and Rear Body Installs with Body Post for the Traxxas Revo.

FEATURES:
Black plastic building
"TRX" logo design on front body mount

INCLUDES:
Front and rear body installs Part #5314
Front and rear body post Part #5314
(4) 2.5X18mm screw pins
(1) 4X10mm button head screw

REQUIRES:
Installation on the Traxxas Revo

Want another fantastic thing to enhance the above stated thing?

Skid Plate Set Front & Rear Revo Summit

This is the Front and Rear Skid Plates for the Traxxas Revo.

FEATURES:
Black plastic building
Front skid plate is a two-piece design
Rear skid plate is a one-piece design

INCLUDES:
Front and read skid plates Part #5337
(8) 3X10mm button head screws Part #2577
(1) 3X30mm button head screws Part #2582

REQUIRES:
Installation on the Traxxas Revo

Want another fantastic thing to enhance the above stated thing?

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

INCLUDES:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Instruction sheet

REQUIRES:
Two packages had to finish truck

This thing is often bought with the above stated thing.

Chassis Brace, Rear For Summit E-Revo

This is the Back Chassis Brace for the 1/10 scale Traxxas E-Revo.

FEATURES:
Aluminum building, blue in color

INCLUDES:
Back Chassis Brace
Two 3x35mm Socket Head Screws
One 4x14mm Button Head Screw
Instruction Sheet

SPECIFICATIONS:
Length: 5.1" (129mm)

The below thing additionally pairs really well with the thing being gone over.

4X12mm Screws Cntrsnk (Hex Drive) (6)

These are the Traxxas Countersunk 4 x 12mm Screws.

FEATURES:
Metal building
Black in color

INCLUDES:
Six 4 x 12mm Countersunk Flathead Hex Screws

REQUIRES:
Installation on the vehicle

Many others have actually bought this thing together with the thing that you are currently reviewing.

Revo Wing Black, Includes Deca

This is the Black Wing for the Traxxas Revo 3.3.
This part connects to the back of the body.

FEATURES:
Plastic building, black in color

INCLUDES:
One rear wing with decals

REQUIRES:
Installation on the Revo 3.3

SPECIFICATIONS:
Length: 8" (203.2mm)
Width: 3" (76.2mm)

COMMENTS:
Also readily available in white (TRAC9400) and exo-carbon (TRAC9447)