Traxxas Revo Wing Black, Includes Deca

This is the Black Wing for the Traxxas Revo 3.3.
This part attaches to the rear of the body.

FEATURES:
Plastic construction, black in color

CONSISTS OF:
One rear wing with decals

REQUIRES:
Setup on the Revo 3.3

SPECS:
Length: 8" (203.2mm)
Width: 3" (76.2mm)

COMMENTS:
Also offered in white (TRAC9400) and exo-carbon (TRAC9447)

Numerous others have actually gotten this thing along with the thing that you are presently reading about.

Revo Wing Mount Includes Hardware

This is the Wing Mount for the Traxxas Revo 3.3

FUNCTIONS:
Nylon Building and construction
Black in Color

CONSISTS OF:
2 Wing Supports
One Wing Mount
4 4mm x 8mm Cap Head Socket Screws
4 3mm x 12mm Cap Head Socket Screws
One Instruction Sheet

REQUIRES:
Setup

Get this thing to improve the one you are reading about.

Frnt & Rr Body Mounts Revo

This is the Front and Rear Body Installs with Body Post for the Traxxas Revo.

FEATURES:
Black plastic construction
"TRX" logo design on front body mount

CONSISTS OF:
Front and rear body installs Part #5314
Front and rear body post Part #5314
(4) 2.5X18mm screw pins
(1) 4X10mm button head screw

REQUIRES:
Setup on the Traxxas Revo

This is a amazing enhancement to the thing presently being reviewed.

Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Back Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic construction
Rocker shafts preinstalled

CONSISTS OF:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Setup on the Traxxas Revo

This thing compliments the main item below.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building and construction
Blue and Black in Color

CONSISTS OF:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Instruction sheet

REQUIRES:
2 packages required to complete truck

Regularly gotten with the thing that you are presently reading about.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Car and Secures the Chassis.

FEATURES:
Resilient Plastic Building and construction
Black in Color

CONSISTS OF:
One Bumper
One Group RPM Decal

REQUIRES:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

COMMENTS:
The Factory Number is #81162