Traxxas Frnt & Rr Body Mounts Revo

This is the Front and Rear Body Mounts with Body Post for the Traxxas Revo.

FEATURES:
Black plastic building and construction
"TRX" logo design on front body mount

CONSISTS OF:
Front and rear body installs Part #5314
Front and rear body post Part #5314
(4) 2.5X18mm screw pins
(1) 4X10mm button head screw

NEEDS:
Installation on the Traxxas Revo

Lots of others have actually bought this item together with the item that you are currently reading about.

Body Mount Posts, Front & Rear

These are the Tall Front and Rear Body Mount Posts for use on the
Traxxas Summit Truck

FUNCTIONS:
Nylon building and construction
Black in color

CONSISTS OF:
Front and Rear Body Mount Posts

NEEDS:
Installation on the automobile

The below item likewise pairs actually well with the item being discussed.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for use with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

Want another excellent item to match the above discussed item?

Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Back Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic building and construction
Rocker shafts preinstalled

CONSISTS OF:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

NEEDS:
Installation on the Traxxas Revo

The below item likewise pairs actually well with the item being discussed.

Center Half Shafts E-Revo

This is the Center Half Shaft Set for the Traxxas E-Revo

FUNCTIONS:
Plastic building and construction, black in color

CONSISTS OF:
Center half shafts (three internal splined and 2 external splined)

NEEDS:
Installation on the automobile

SPECS:
Diameter: 17.2mm (0.68")

Lots of others have actually bought this item together with the item that you are currently reading about.

Bumper Frnt W/Mount 4 X 10Mm Bcs (2) 3 X 25Mm Bcs (2) Revo

This is the replacement Front Bumper and Bumper Mount for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Nylon Building
Silver Bumper and Black Mount

CONSISTS OF:
One Silver Nylon Front Bumper
One Black Nylon Front Bumper Mount
Two 3mm x 25mm Cap Hex Head Machine Thread Screws
Two 4mm x 10mm Cap Hex Head Machine Thread Screws

NEEDS:
Assembly onto Automobile
2mm Hex Wrench, GPMR8011
2.5mm Hex Wrench, GPMR8012

This is a great addition to the item currently being discussed.

Skid Plate Set Front & Rear Revo Summit

This is the Front and Rear Skid Plates for the Traxxas Revo.

FEATURES:
Black plastic building and construction
Front skid plate is a two-piece design
Rear skid plate is a one-piece design

CONSISTS OF:
Front and read skid plates Part #5337
(8) 3X10mm button head screws Part #2577
(1) 3X30mm button head screws Part #2582

NEEDS:
Installation on the Traxxas Revo

Here is a excellent item that several others have actually bought at the same time.

High Volume Air Filter Assembl

This is the High Volume Air Filter Body
for the Traxxas Revo 3.3.

FUNCTIONS:
Replaces damaged or filthy air filter assemblies
Plastic body with foam component and rubber attachment tube

CONSISTS OF:
Foam filter and pre filter, assistance cap, filter base and wire mount

NEEDS:
Air filter oil, DTXC2465

SPECS:
Total Height: 3.9" (100mm)
Filter Diameter: 1.6" (41mm)

You will certainly enjoy this item if you have the item just above stated.

Driveshafts, Summit & E-Revo Center E-Revo (Steel Constant-

These are the optional Center Driveshafts for use on the Traxxas E-Revo.

FUNCTIONS:
Steel building and construction
Constant-velocity
Inner and external dust boots

CONSISTS OF:
One Back Center Driveshaft
One Front Center Driveshaft

NEEDS:
Installation on the automobile