Traxxas Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic building and construction
Black in color

CONSISTS OF:
One left caster block
One right caster block

REQUIRES:
Setup on Slash

SPECS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

This thing praises the above talked about thing.

Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic building and construction
Black in color

CONSISTS OF:
2 steering blocks

REQUIRES:
Setup on steering assembly

SPECS:
Length: 35mm (1.38")
Width: 32mm (1.26")

Get this thing to enhance the one you are reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This is a great enhancement to the thing currently being talked about.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Protected with blue rubber seals

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Assembly to car

SPECS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are used to support the Main Clutch (one required).

This thing praises the main item right here.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

CONSISTS OF:
Front driveshaft assembly
Screw pin

REQUIRES:
Setup on car

Get this thing to enhance the one you are reading about.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on car

Many others have actually gotten this thing together with the thing that you are currently checking out.

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Setup on the car

Here is a fantastic thing that lots of others have actually purchased the very same time.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

This thing is frequently gotten with the above discussed thing.

Cover, Center Driveshaft (Clea

This is the Center Driveshaft Cover for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Clear nylon building and construction

CONSISTS OF:
One Center Driveshaft Cover

REQUIRES:
Setup over driveshaft

SPECS:
Length: 210mm (8.3")
Width: 15mm (0.59")

This thing praises the main item right here.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 front 39mm (69mm center to center) turnbuckles and instruction
    sheet

REQUIRES:
Setup on the car

This is a great enhancement to the thing currently being talked about.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas cars
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building and construction

CONSISTS OF:
2 hex hubs
Four axle pins

REQUIRES:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These hubs could be used with other cars utilizing the exact same
    pin/hex design. These hubs Will Not deal with the T-Maxx or E-Maxx.