Traxxas 58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends
Can be Used on Front or Rear

CONSISTS OF:
Two 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

NEEDS:
Assembly onto Vehicle

Want one more terrific item to compliment the above stated item?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two rear 49mm (82mm center to center) turnbuckles

NEEDS:
Installation on the automobile

The listed below item likewise sets really well with the item being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This item praises the above discussed item.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two front 39mm (69mm center to center) turnbuckles and direction
    sheet

NEEDS:
Installation on the automobile

Numerous others have actually purchased this item in addition to the item that you are presently reading about.

61Mm Turnbuckles (Front Tie Rods) (2) (Includes In Stalled

These are the 61mm Front Turnbuckles
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Construction
Black and Silver in Color
Put together w/Rod Ends

CONSISTS OF:
Two 61mm Front Tie Rods
4 Rod Ends
4 Hollow Balls

NEEDS:
Assembly onto Vehicle

You will like this product if you have the product previously pointed out.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on automobile

Here is one more item that praises the item being discussed.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black and silver in color

CONSISTS OF:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

NEEDS:
Installation on the automobile

SPECIFICATIONS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

You will like this product if you have the product previously pointed out.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two 61mm (96mm center to center) turnbuckles

NEEDS:
Installation on the automobile

This item praises the above discussed item.

Front Suspension Arms Left & Right Jato

These are the Front Left and Right Suspension Arms
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Left Front Suspension Arm
One Right Front Suspension Arm

NEEDS:
Assembly onto Vehicle

Numerous others have actually purchased this item in addition to the item that you are presently reading about.



This is an optional Pro-Line ProTrac Suspension Kit Front Arms
for use on the 1/10 scale 2WD Traxxas Slash.
**Will not work with the 4x4 Slash.**

FEAUTRES:
Nylon building and construction, black in color
Boosts forward velocity, corner speed, consistency and
    drivability

CONSISTS OF:
Two front arms
One Proline decal

NEEDS:
Installation onto automobile