Traxxas Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Hyperlinks
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Assembled w/Rod Ends

SUCHES AS:
Two 61mm (96mm center to center) turnbuckles

NEEDS:
Installation on the automobile

Want an additional terrific product to compliment the above pointed out product?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Assembled w/Rod Ends

SUCHES AS:
Two rear 49mm (82mm center to center) turnbuckles

NEEDS:
Installation on the automobile

This product compliments the above discussed product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This product compliments the above discussed product.



This is an optional Pro-Line ProTrac Suspension Set Rear Arms
for usage on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon construction, black in color
Increases forward acceleration, corner speed, consistency and
    drivability

SUCHES AS:
Two rear arms
One Proline decal

NEEDS:
Installation onto automobile

Regularly acquired with the product that you are currently reading about.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Assembled w/Rod Ends
Can be Used on Front or Rear

SUCHES AS:
Two 58mm Threaded Rods
Four 3mm Ball Ends
Four 3mm Hollow Balls

NEEDS:
Assembly onto Car

Get this product to improve the one you read about.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Assembled w/Rod Ends

SUCHES AS:
Two front 39mm (69mm center to center) turnbuckles and direction
    sheet

NEEDS:
Installation on the automobile

Below is an additional product that compliments the product being discussed.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

SUCHES AS:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on automobile

Many others have acquired this product along with the product that you are currently reading about.

Large Servo Saver

This is a large servo saver that can be used in Traxxas automobiles or any vehicle that
requires a large design servo saver.
FEATURES:
Hard white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that enable you to install the saver
on many popular servos consisting of: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also included is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for mounting the steering linkages.

This product is regularly acquired with the above pointed out product.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93