RPM Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Blue

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These install to the bulkhead and the hubs install to it.

FEATURES:
Heavy Duty Nylon Building
Blue in Color
Pre-Drilled Shock Mounting Positions
For the Rear of the Electric Rustler and Electric Stampede

CONSISTS OF:
Two Rear Blue A-Arms
One RPM Decal Sheet w/ Two RPM Brandings

NEEDS:
Assembly onto Vehicle.

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Center: 1.11" (28.25mm)
Density: .31" (7.8mm)

Frequently acquired with the item that you are presently checking out.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, blue in color
Direct fit hop-up needs no design modification for installation

CONSISTS OF:
Two Front A-Arms

NEEDS:
Setup following the design handbook

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowest 1.52" (38.5mm) at largest

COMMENTS:
For the black version of this part order RPMC8245

This item compliments the above gone over item.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Front bearing (hub) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

Lots of others have actually acquired this item in addition to the item that you are presently checking out.



You will certainly enjoy this thing if you have the thing previously pointed out.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be utilized on Traxxas or most other brand names of cars.

FEATURES:
Metal clips are silver in color

CONSISTS OF:
Twelve body clips

SPECS:
Length: aprrox. 7/8"