Traxxas Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black and silver in color

INCLUDES:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

Lots of others have actually gotten this item along with the item that you are currently reviewing.

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Installation on the vehicle

Below is a fantastic item that numerous others have actually bought at the same time.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends
Can be Utilized on Front or Back

INCLUDES:
Two 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

REQUIRES:
Assembly onto Car

Want another fantastic item to match the above pointed out item?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Below is another item that compliments the item being reviewed.



This is an optional Pro-Line ProTrac Suspension Set Front Arms
for usage on the 1/10 scale 2WD Traxxas Slash.
**Will not work with the 4x4 Slash.**

FEAUTRES:
Nylon building and construction, black in color
Boosts forward acceleration, corner speed, consistency and
    drivability

INCLUDES:
Two front arms
One Proline decal

REQUIRES:
Installation onto vehicle

Want another fantastic item to match the above pointed out item?

Servo Horns, Steering, Steerin

    This is the Steering Servo Horns for the Traxxas E-Maxx.

FEATURES:
Plastic servo horn building and construction
Steering rods come with rod ends set up

INCLUDES:
2 steering servo horns
1 3x12mm threaded rod steering link with rod ends and hollow balls

REQUIRES:
Installation on the E-Maxx

You will certainly like this product if you have the product earlier discussed.



This is an optional Pro-Line ProTrac Suspension Set Back Arms
for usage on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon building and construction, black in color
Boosts forward acceleration, corner speed, consistency and
    drivability

INCLUDES:
Two rear arms
One Proline decal

REQUIRES:
Installation onto vehicle