RPM Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the optional RPM Wide Front Bumper
for the Traxxas Rustler, Stampede, Nitro Sport and Bandit.

FEATURES:
Adds additional 1/2" (13mm) protection to front end
Nylon blend building, red in color

CONSISTS OF:
Wide Front Bumper

SPECIFICATIONS:
Width: 6.2" (157mm)
Length: 2.7" (70mm) from rear of installing area to outside edge

Want an additional terrific item to match the above pointed out item?

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at rear of chassis to avoid car from turning over
    during wheelies

CONSISTS OF:
Put together optional Wheelie Bar with installing instructions and
    hardware

REQUIRES:
Securing to rear of chassis

Many others have actually purchased this item in addition to the item that you are currently reading about.



This is a conventional replacement Antenna Tube with Cap from Dubro.
This product can be used anywhere an antenna tube is needed to support
a receiver antenna wire.

FEATURES:
Red plastic building

CONSISTS OF:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

REQUIRES:
Nothing. This is a direct fit part for any boat, car, and so on that uses
    a conventional size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Size: 1/8" (3.2mm)

Here is a terrific item that many others have actually bought at the same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

CONSISTS OF:
Two Front bearing (hub) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

The below item also pairs truly well with the item being reviewed.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Versatile plastic building, green in color

CONSISTS OF:
RPM Wide Front Bumper in Green

SPECIFICATIONS:
Length: 2.7" (70mm) determined at center
Width: 6.2" (157mm)
Density: 0.12" (3.2mm)

This item praises the above reviewed item.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Principles Polished Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat dealt with and polished steel building

CONSISTS OF:
Left and Right King Pins for front suspension

Many others have actually purchased this item in addition to the item that you are currently reading about.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Red

These are the optional RPM Sturdy Rear A-Arms in Red
for the Electric Powered Traxxas 2WD Rustler and Stampede.

FEATURES:
Each A-arm is 0.25oz (7g) lighter than stock A-arm
Gets rid of over 0.03" (0.8mm) of slop from the inner arm mount
Nylon blend building, red in color

CONSISTS OF:
Left and Right Rear A-Arms

Want an additional terrific item to match the above pointed out item?

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of Sturdy Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Bandit, Slash and Nitro Slash.

FEATURES:
Composite nylon building, red in color
Almost 25% lighter than stock variations
Increased clearance areas in the external portion allows increased
    droop travel when used with RPM #80372 and #80382 extra-large
    bearing providers

CONSISTS OF:
Two Sturdy Front-A Arms in Red