ST Racing Concepts Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Principles Polished Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel construction

CONSISTS OF:
Left and Right King Pins for front suspension

Frequently bought with the item that you are presently reviewing.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks mount to the front A-arms and is what the
guiding knuckles connect to.

FEATURES:
Nylon construction, black in color
Stamped right and delegated guarantee right setup

CONSISTS OF:
2|2} RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and guiding knuckles

Want one more great item to match the above mentioned item?

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
2|2} Front bearing (center) providers
2|2} RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

Want one more great item to match the above mentioned item?



Below is a great item that many others have purchased the same time.



Below is a great item that many others have purchased the same time.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
2|2} rear bearing (center) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at widest point: 15.4mm (0.61")

This item is frequently bought with the above mentioned item.



This is the ST Racing Solidified Polished Steel Lock-nut Design Hinge-pin Set
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins backing out of the A-arms? If you have actually
been running your Traxxas vehicle long enough, you probably have
currently experienced this problem. ST Racing Principles Heat Treated
Polished Steel Lock-Nut Design Hinge-Pin Set will resolve this problem
once and for all. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat treated for boost in durability, and then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts

The below item also sets really well with the item being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)