RPM Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Flexible plastic building and construction, green in color

CONSISTS OF:
RPM Wide Front Bumper in Green

SPECS:
Length: 2.7" (70mm) measured at center
Width: 6.2" (157mm)
Density: 0.12" (3.2mm)

This thing praises the above discussed thing.

Wheelie Bar Assembled-Green Stampede/Rustler/Bandit

This is an optional Wheelie Bar in Green for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, neon green in color
Installs at rear of chassis to avoid car from turning over
    throughout wheelies

CONSISTS OF:
Put together optional Wheelie Bar with installing instructions and
    hardware

REQUIRES:
Attaching to rear of chassis

This thing praises the above discussed thing.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks mount to the front A-arms and is what the
guiding knuckles connect to.

FEATURES:
Nylon building and construction, black in color
Stamped right and left to insure appropriate setup

CONSISTS OF:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and guiding knuckles

This is a fantastic addition to the thing presently being discussed.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FUNCTIONS:
Fiberglass Construction

CONSISTS OF:
One Tie Bar

REQUIRES:
Suspension Pins (TRAC4940)

SPECS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Density: 2.0 mm (0.082")

REMARKS:
None

Below is an additional thing that praises the thing being discussed.

Heavy Duty Camber Link, For Traxxas E-Rustler & Stampede 2Wd

These are Heavy Duty Camber Hyperlinks for the Traxxas Rustler & Stampede.

FEATURES:
One Piece Molded Nylon
Black in Color

CONSISTS OF:
Four Heavy Responsibility Camber Hyperlinks

REQUIRES:
Traxxas Rustler or Stampede

SPECS:
Length: 3.55" (for the (2) longer links)
Width: .320" (for the (2) longer links)
Lenght: 3.062" (for the (2) shorter links)
Width: .320" (for the (2) shorter links)

REMARKS:
Factory Number is #81262

Want an additional wonderful thing to enhance the above pointed out thing?

Heavy Duty Camber Link, For Traxxas E-Rustler & Stampede 2Wd, Gr

These are the optional RPM Heavy Duty Camber Hyperlinks in Green
for the Traxxas Electric Rustler and Stampede.

FEATURES:
Constructed of molded plastic, green in color

CONSISTS OF:
Two Front and 2 Rear Heavy Duty Camber Hyperlinks in Green

Regularly acquired with the thing that you are presently reading about.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Blue Wide Front Bumper
for the Traxxas Rustler, Stampede and Bandit.
The Bumper goes on the Front of the Automobile and Secures the Chassis.

FEATURES:
Long lasting plastic building and construction
Fits both nitro and electrical versions of the Rustler and Stampede

CONSISTS OF:
One Bumper
One Group RPM Decal

REQUIRES:
Installation onto the Traxxas Rustler, Stampede or Bandit

SPECS:
Length: 2-3/4" (70mm)
Width: 6-1/4" (159mm)

Get this thing to boost the one you are reading around.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a set of ST Racing Ideas Sleek Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel building and construction

CONSISTS OF:
Left and Right King Pins for front suspension