RPM Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Blue Wide Front Bumper
for the Traxxas Rustler, Stampede and Bandit.
The Bumper goes on the Front of the Car and Safeguards the Chassis.

FEATURES:
Long lasting plastic construction
Fits both nitro and electrical versions of the Rustler and Stampede

INCLUDES:
One Bumper
One Group RPM Decal

REQUIRES:
Installation onto the Traxxas Rustler, Stampede or Bandit

SPECIFICATIONS:
Length: 2-3/4" (70mm)
Width: 6-1/4" (159mm)

Many others have actually gotten this item along with the item that you are currently reviewing.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, blue in color
Installs at back of chassis to avoid car from flipping over
    throughout wheelies

INCLUDES:
Assembled optional Wheelie Bar with mounting guidelines and
    hardware

REQUIRES:
Attaching to back of chassis

Want an additional wonderful item to match the above stated item?

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Flexible plastic construction, green in color

INCLUDES:
RPM Wide Front Bumper in Green

SPECIFICATIONS:
Length: 2.7" (70mm) determined at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

Many others have actually gotten this item along with the item that you are currently reviewing.

Large Servo Saver

This is a large servo saver that can be used in Traxxas vehicles or any vehicle that
needs a large design servo saver.
FEATURES:
Tough white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that permit you to install the saver
on most popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also consisted of is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for mounting the guiding linkages.

Below is a wonderful item that several others have actually purchased the very same time.

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead used in numerous Traxxas vehicles.
The front suspension arm hinge pins pass through this piece.

FEATURES:
Gray nylon construction

INCLUDES:
One front bulkhead

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is used on the following cars:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

The listed below item additionally sets truly well with the item being gone over.

Wheelie Bar Assembled-Green Stampede/Rustler/Bandit

This is an optional Wheelie Bar in Green for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, neon green in color
Installs at back of chassis to avoid car from flipping over
    throughout wheelies

INCLUDES:
Assembled optional Wheelie Bar with mounting guidelines and
    hardware

REQUIRES:
Attaching to back of chassis

This item praises the above gone over item.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks install to the front A-arms and is what the
guiding knuckles connect to.

FEATURES:
Nylon construction, black in color
Stamped right and delegated insure proper installation

INCLUDES:
2 RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and guiding knuckles