Traxxas Body Mounts Front & Rear

These are the replacement body mounts for the Traxxas Stampede truck. They
are built of black plastic and are the posts that the lexan truck body
connects to.

PACKAGE
CONSISTS OF:
One front body install
One rear body install

REMARKS:
Does not include body clips

Below is one more product that praises the product being discussed.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to avoid vehicle from flipping over
    throughout wheelies

CONSISTS OF:
Assembled optional Wheelie Bar with installing guidelines and
    hardware

REQUIRES:
Fastening to back of chassis

Below is a excellent product that several others have actually bought at the same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for models with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Numerous others have actually gotten this product together with the product that you are presently checking out.

Aluminum Front Skid Plate, Red, For Traxxas Stampede

This is the optional ST Racing Front Skid Plate in Red
for the Traxxas 1/10 scale Electric Stampede.

FEATURES:
CNC machined aluminum
Replaces stock plastic front skid plates

CONSISTS OF:
ST Racing Front Skid Plate in Red with Mounting Screws

Want one more excellent product to match the above pointed out product?

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Set for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Lowers the chassis 1" (25.4mm) for better handling and higher
    cornering speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
2 Nerf Bars
Battery Hold Down with Front and Rear Retainers
2 Front Shock Springs
Hardware and Guidelines

Below is a excellent product that several others have actually bought at the same time.

Battery, Power Cell (Nimh, 6-C Stick) W/Std Connec Tor

This is the 7.2V NiMH 1500mAh Stick Battery Pack from Traxxas.

FEATURES:
Stick configuration
14-gauge wire
Standard connector

CONSISTS OF:
One 7.2V NiMH 1500mAh Stick Battery Pack

REQUIRES:
A peak-detecting charger rated for NiMH batteries

SPECIFICATIONS:
Length: 134mm (5.3")
Width: 47mm (1.9")
Height: 24mm (0.94")

Below is a excellent product that several others have actually bought at the same time.

30T Idler Gear Steel

This is the optional Steel Idler Gear for numerous Traxxas Vehicles.

FEATURES:
Steel construction

CONSISTS OF:
One steel 30T idler gear

REQUIRES:
Setup on vehicle

This product is frequently gotten with the above pointed out product.

Large Servo Saver

This is a large servo saver that can be utilized in Traxxas automobiles or any car that
needs a large design servo saver.
FEATURES:
Difficult white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that allow you to install the saver
on a lot of popular servos consisting of: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also included is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for installing the guiding linkages.