RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of Strong Front-A Arms in Green
for the Traxxas Electric Rustler, Stampede, Bandit, Slash and Nitro Slash.

FEATURES:
Composite nylon building, green in color
Almost 25% lighter than stock versions
Increased clearance locations in the external part enables increased
    sag travel when utilized with RPM #80372 and #80382 large
    bearing carriers

INCLUDES:
2 Strong Front-A Arms in Green

This product praises the above gone over product.

Rear A-Arms, For Traxxas Elecric Stampede 2Wd And Rustler

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These install to the bulkhead and the centers install to it.

FEATURES:
Strong Nylon Construction
Green in Color
Pre-Drilled Shock Mounting Positions
For the Rear of the Electric Rustler and Electric Stampede

INCLUDES:
2 Rear Green A-Arms
One RPM Decal Sheet w/ 2 RPM Brandings

NEEDS:
Assembly onto Vehicle

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Hub: 1.11" (28.25mm)
Thickness: .31" (7.8mm)

Several others have purchased this product in addition to the product that you are presently reviewing.

Rear A-Arms, For Traxxas Slash 2Wd, Green

This is a set of optional RPM Rear A-Arms
for the 1/10 scale Traxxas Slash 2WD.

FUNCTIONS:
Composite plastic building, green in color

INCLUDES:
Left and Right Rear A-Arm

Several others have purchased this product in addition to the product that you are presently reviewing.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks install to the front A-arms and is what the
guiding knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and delegated insure proper installation

INCLUDES:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and guiding knuckles

Regularly purchased with the product that you are presently reviewing.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Versatile plastic building, green in color

INCLUDES:
RPM Wide Front Bumper in Green

SPECS:
Length: 2.7" (70mm) measured at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

Right here is a excellent product that many others have purchased the same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 Front bearing (center) carriers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

This product praises the above gone over product.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a set of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel building

INCLUDES:
2 Rear Driveshafts

This product praises the main item here.

Spur Gear (83T) 48P

This is a 48P, 83T Spur Gear for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Developed for designs with a slipper clutch.
Black plastic building

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 83

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).