RPM Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Rear Bumper Mount from RPM for usage on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building
Blue in color

INCLUDES:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
Three 3x25mm Screws
One 3mm Locknut
2|2} RPM Decals

REQUIRES:
Setup on the automobile
2mm Allen Motorist for Setup

Get this thing to boost the one you read about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Sturdy nylon strengthened plastic building
Uses all stock hardware (for mounting shocks etc.)

INCLUDES:
One back shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm

Here is a fantastic thing that lots of others have actually bought at the same time.

Rear Bumper, For Traxxas Slash 2Wd, Blue

This is the RPM Rear Bumper for usage on the Traxxas Slash.

FEATURES:
Nylon building
Blue in color

INCLUDES:
One Left Side Bumper Support
One Right Side Bumper Support
One Rear Bumper
8 3x16mm Buttonhead Screws

REQUIRES:
Setup on the automobile

REMARKS:
Also readily available in:
Black (RPMC0080)
Chrome (RPMC0081)

This thing compliments the above reviewed thing.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Vehicle and Secures the Chassis.

FEATURES:
Long lasting Plastic Building and construction
Black in Color

INCLUDES:
One Bumper
One Group RPM Decal

REQUIRES:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This thing compliments the above reviewed thing.



This is the ST Racing Hardened Polished Steel Lock-nut Design Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Fed up with the stock hinge-pins revoking the A-arms? If you've
been running your Traxxas automobile long enough, you most likely have
currently experienced this problem. ST Racing Principles Heat Treated
Polished Steel Lock-Nut Design Hinge-Pin Kit will fix this problem
at last. CNC Machined from premium 12.9 grade carbon
steel, that is then heat treated for boost in durability, and then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

This thing is frequently acquired with the above mentioned thing.

Blue Gearbox Housing And Rear Mounts For Traxxas 2Wd Vehicles

This is the optional RPM Hybrid Gearbox Real estate in Blue
for the Traxxas 1/10 scale 2WD Slash, Stampede, E-Rustler and Bandit.

FEATURES:
0.12" (3mm) thick 6061 T6 aluminum motor plate offers strength to
    lock in gear mesh, and much better heat dissipation than stock plastic
    motor plate
Motor plate is different from rear bumper installs removing damage to
    the plate in the event of a rear crash
Formed nylon gearbox real estate with stock bumper mounting holes
Different real estate and rear installs allow transmission upkeep
    without affecting suspension settings
0° and 3° formed rear installs offer tighter tolerances and less slop
    than machined elements for much better camber and toe angle retention

INCLUDES:
Two Gearbox Housings, Motor Plate, two 0° and two 3° Rear Mounts and
    Instructions