RPM Low Visibility Wheelie Bars, For Traxxas Slash 2Wd & Slash 4X4

These are the optional RPM Low Visibility Wheelie Bars
for the Traxxas Slash 2WD and Slash 4x4.

**Just works with RPM Back Bumper, does not work with stock Traxxas Bumper.**

FEATURES:
Hardened plastic building
Avoids vehicle from turning over in reverse throughout tough
    velocity

CONSISTS OF:
Wheelie Bar Assembly with Mounting Hardware and Instructions

This thing is regularly bought with the above pointed out thing.

Traxxas Slash 4X4 Rear Bumper-Black

This is the optional RPM Back Bumper for use on the Traxxas Slash 4X4.
Will NOT deal with the Slash 2WD.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Left Side Bumper Support
One Right Side Bumper Support
One Rear Bumper
8 3x16mm Buttonhead Screws
One Upper Bumper Mount
One Lower Bumper Mount

REQUIRES:
Setup on the vehicle

REMARKS:
Likewise readily available in: Chrome (RPMC0123)
Blue (RPMC0125)

Right here is another thing that praises the thing being talked about.

Rear Bumper, For Traxxas Slash 2Wd, Black

This is the optional RPM Back Bumper for use on the Traxxas Slash.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Left Side Bumper Support
One Right Side Bumper Support
One Rear Bumper
8 3x16mm Buttonhead Screws

REQUIRES:
Setup on the vehicle

REMARKS:
Likewise readily available in:
Blue (RPMC0082)
Chrome (RPMC0081)

This thing is regularly bought with the above pointed out thing.

Mud Flaps, For Slash Bumper

These are the RPM Mud Flaps for use on the
RPM Bumpers created for the Traxxas Slash.

FEATURES:
Rubber building
Black in color

CONSISTS OF:
Two Mud Flaps
Two Support Arms
Two Screw Supports
Four 3x10mm Buttonhead Screws
Four 3x16mm Buttonhead Screws
Guideline Sheet

REQUIRES:
Setup on the vehicle

REMARKS:
Works just with the following Bumpers:
RPM Back Bumper Black Slash (RPMC0080)
RPM Back Bumper Chrome Slash (RPMC0081)
RPM Back Bumper Blue Slash (RPMC0082)

This thing praises the main item right here.

Snap Tite Body Saver, For Associated Trucks

This is a plan of body savers created for the Associated RC10T, RC10T2,
and RC10GT trucks (or any automobile that utilizes 3/16" diameter body posts).

FEATURES:
Constructed of black nylon, these are rings that snap together through the
body post holes in Lexan bodies
Will help safeguard the body from tearing or damage around these holes
Plan consists of enough for 4 body post holes and 1 antenna tube hole

PACKAGE
CONSISTS OF:
5 sets of body savers
Little RPM decal sheet
Quick instructions

You will enjoy this item if you have the item above discussed.

Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Black

This is the optional Back Bumper Mount from RPM for use on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
Three 3x25mm Screws
One 3mm Locknut
Two RPM Decals

REQUIRES:
Setup on the vehicle
2mm Allen Motorist for Setup

The below thing additionally sets truly well with the thing being talked about.

Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, coated
Anodized black with white springs
Entirely assembled

CONSISTS OF:
Four totally assembled shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and assembling onto the model