RPM Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Red

These are the optional RPM Sturdy Back A-Arms in Red
for the Electric Powered Traxxas 2WD Rustler and Stampede.

FEATURES:
Each A-arm is 0.25oz (7g) lighter than stock A-arm
Eliminates over 0.03" (0.8mm) of slop from the inner arm mount
Nylon mix construction, red in color

CONSISTS OF:
Left and Right Rear A-Arms

This item praises the main item below.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of Sturdy Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Outlaw, Slash and Nitro Slash.

FEATURES:
Composite nylon construction, red in color
Nearly 25% lighter than stock variations
Increased clearance areas in the outer part permits increased
    sag travel when utilized with RPM #80372 and #80382 large
    bearing providers

CONSISTS OF:
Two Sturdy Front-A Arms in Red

Below is a terrific item that numerous others have actually purchased the very same time.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the optional RPM Wide Front Bumper
for the Traxxas Rustler, Stampede, Nitro Sport and Bandit.

FEATURES:
Adds extra 1/2" (13mm) protection to front end
Nylon mix construction, red in color

CONSISTS OF:
Wide Front Bumper

SPECS:
Width: 6.2" (157mm)
Length: 2.7" (70mm) from rear of installing location to outside edge

Below is one more item that praises the item being gone over.

3X8mm Screws Flat-Head (Hex Drive) (6)

These are the Traxxas Flathead 3 x 8mm Screws.

FEATURES:
Metal construction
Black in color

CONSISTS OF:
6 3 x 8mm Flathead Hex Screws

REQUIRES:
Setup on the automobile

You will love this product if you have the product earlier mentioned.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is what the
steering knuckles connect to.

FEATURES:
Nylon construction, black in color
Stamped right and delegated insure appropriate setup

CONSISTS OF:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and steering knuckles