Traxxas 3X8mm Screws Flat-Head (Hex Drive) (6)

These are the Traxxas Flathead 3 x 8mm Screws.

FEATURES:
Metal construction
Black in color

CONSISTS OF:
6 3 x 8mm Flathead Hex Screws

NEEDS:
Installation on the car

Want another wonderful item to compliment the above mentioned item?

Spur Gear (83T) 48P

This is a 48P, 83T Stimulate Gear for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Developed for designs with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 83

COMMENTS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).

This item is frequently acquired with the above mentioned item.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
6 black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

COMMENTS:
These may likewise be referred to as coverplate screws.

Want another wonderful item to compliment the above mentioned item?

Tool ST81/02 10 49 62 84

This is a replacement set of tools which includes the Tamiya Super
Blackfoot.

Includes: (1) 4-way box wrench
(2) hex (allen) wrenches - 1 large, 1 small
(4) 3mm set screws

Requires: Absolutely nothing else needed. These are stock parts.

This item compliments the main item here.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Red

These are the optional RPM Strong Back A-Arms in Red
for the Electric Powered Traxxas 2WD Rustler and Stampede.

FEATURES:
Each A-arm is 0.25oz (7g) lighter than stock A-arm
Eliminates over 0.03" (0.8mm) of slop from the inner arm install
Nylon mix construction, red in color

CONSISTS OF:
Left and Right Rear A-Arms

This item compliments the main item here.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FUNCTIONS:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity security makes it impossible to link backwards
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Safe positive locking spring crammed terminals for consistent
    contact
Numerous locking barbs keep terminals secure

CONSISTS OF:
Two black male plastic connectors
Two sets of gold metal pins
Guideline sheet

NEEDS:
Soldering wires to the metal pins

Many others have acquired this item in addition to the item that you are currently reviewing.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Want another wonderful item to compliment the above mentioned item?

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Gear for designs
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Developed for designs with a slipper clutch
Black plastic construction

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 90

COMMENTS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 86T gear (TRAC4686).