RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of Strong Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Outlaw, Slash and Nitro Slash.

FEATURES:
Composite nylon construction, red in color
Almost 25% lighter than stock variations
Increased clearance areas in the outer part allows increased
    droop travel when utilized with RPM #80372 and #80382 oversized
    bearing carriers

INCLUDES:
2 Strong Front-A Arms in Red

Right here is a terrific item that numerous others have actually bought at the exact same time.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Red

These are the optional RPM Strong Back A-Arms in Red
for the Electric Powered Traxxas 2WD Rustler and Stampede.

FEATURES:
Each A-arm is 0.25oz (7g) lighter than stock A-arm
Eliminates over 0.03" (0.8mm) of slop from the inner arm install
Nylon mix construction, red in color

INCLUDES:
Left and Right Rear A-Arms

This item is frequently gotten with the above stated item.

Rear A-Arms, For Traxxas Slash 2Wd, Red

These are the optional RPM Strong Back A-Arms in Red
for the Traxxas 2WD Electric Slash.
**Will not fit the Nitro Slash, or other Traxxas vehicles.**

FEATURES:
10% lighter than the original arms
Material around inner and outer hinge pins was increased by 64%
    for greater durability
Eliminates most slop in rear suspension
New design does not allow dirt to get caught in lower A-arm
Nylon mix construction, red in color

INCLUDES:
Left and Right Rear A-Arms

Many others have actually gotten this item in addition to the item that you are currently reviewing.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the optional RPM Wide Front Bumper
for the Traxxas Rustler, Stampede, Nitro Sport and Bandit.

FEATURES:
Includes extra 1/2" (13mm) defense to front end
Nylon mix construction, red in color

INCLUDES:
Wide Front Bumper

SPECS:
Width: 6.2" (157mm)
Length: 2.7" (70mm) from rear of installing location to outdoors edge

Right here is a terrific item that numerous others have actually bought at the exact same time.



These are the optional RPM Strong Camber Hyperlinks in Red
for the Electric Powered Traxxas 2WD Rustler and Stampede.

FEATURES:
Designed for the electrical Rustler and Stampede that consist of stock
    molded camber links
Nylon mix construction, red in color

INCLUDES:
2 Front and two Rear Hyperlinks

You will enjoy this thing if you have the thing previously discussed.



These are the Red Aluminum Front Knuckles from ST Racing
    for the Traxxas Slash 2WD, Stampede, Rustler, Outlaw
and Nitro Slash (TRAD77**).

FEATURES:
Red in color

INCLUDES:
2 Red Aluminum Front Knuckles
Four Ball Bearings

This item compliments the above reviewed item.



This is the ST Racing Red Aluminum Back Center Carrier
for the Traxxas Slash, Stampede, Rustler and Bandit.

FEATURES:
Red in color

INCLUDES:
2 Red Aluminum Back Center Carriers

This item compliments the above reviewed item.

Body Mount Thumbwasher Kit

This is the Pro-Line Body Mount Thumbwasher Kit.

FEATURES:
For the #6070-00 (PROC7000), #6071-00 (PROC7100), #6087-00
    (PROC6087) Pro-Line Body Mount Kits

INCLUDES:
Four each Thumbwashers, 4x12mm Set Screws, and O-Rings

This is a wonderful addition to the item currently being reviewed.