Traxxas Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum building

INCLUDES:
One slipper pressure plate
One slipper hub

REQUIRES:
Installation onto vehicle.

Regularly acquired with the item that you are currently reviewing.

Rebuild Kit Hd Slipper Clutch

This is the Heavy Duty Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Elements for both nitro and electric Revo and Maxx trucks

INCLUDES:
Three Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

The listed below item likewise sets really well with the item being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Numerous others have actually acquired this item along with the item that you are currently reviewing.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur gear

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Diameter: 2.16" (55mm)
Density: .23" (6mm)

Get this item to enhance the one you are reading about.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
.8 metric pitch

INCLUDES:
One 65T 0.8 metric pitch spur gear

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Diameter: 2.12" (54mm)
Density: .23" (6mm)

This item is often acquired with the above pointed out item.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Diameter: 3mm

COMMENTS:
These might also be described as coverplate screws.

Numerous others have actually acquired this item along with the item that you are currently reviewing.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Stimulate Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal building

INCLUDES:
2 different plasting holders
One disk-shaped magnet
Three 8mm screws
Three 10mm screws

SPECIFICATIONS:
Magnet diameter: 5mm
Magnet thickness: 2mm

You will love this product if you have the product just above discussed.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building
Steel 10x15x4mm ball bearing with blue rubber seal
Utilized on slipper shaft

INCLUDES:
One aluminum adapter
One 10x15x4mm ball bearing

REQUIRES:
Installation on to slipper shaft
Staying clutch pieces

Get this item to enhance the one you are reading about.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building
Black in color
.8 Module pitch

INCLUDES:
One 54T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto vehicle

The listed below item likewise sets really well with the item being gone over.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building
Black in color
.8 Module pitch

INCLUDES:
One 58T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto vehicle