Traxxas Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic building
Black in color

CONSISTS OF:
One left caster block
One right caster block

NEEDS:
Setup on Slash

SPECS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

This product compliments the above gone over product.

Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic building
Black in color

CONSISTS OF:
Two steering obstructs

NEEDS:
Setup on guiding assembly

SPECS:
Length: 35mm (1.38")
Width: 32mm (1.26")

Get this product to boost the one you read around.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This is a superb enhancement to the product presently being gone over.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

CONSISTS OF:
Two Ball Bearings

NEEDS:
Assembly to car

SPECS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are used to support the Primary Clutch (one required).

This product compliments the main item right here.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Front driveshaft assembly
Screw pin

NEEDS:
Setup on car

Get this product to boost the one you read around.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

Several others have acquired this product together with the product that you are presently checking out.

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two rear 49mm (82mm center to center) turnbuckles

NEEDS:
Setup on the car

Here is a fantastic product that several others have purchased the very same time.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

This product is often acquired with the above stated product.

Cover, Center Driveshaft (Clea

This is the Center Driveshaft Cover for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Clear nylon building

CONSISTS OF:
One Center Driveshaft Cover

NEEDS:
Setup over driveshaft

SPECS:
Length: 210mm (8.3")
Width: 15mm (0.59")

This product compliments the main item right here.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two front 39mm (69mm center to center) turnbuckles and direction
    sheet

NEEDS:
Setup on the car

This is a superb enhancement to the product presently being gone over.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building

CONSISTS OF:
Two hex hubs
Four axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These hubs might be used with other vehicles making use of the exact same
    pin/hex design. These hubs Will Not deal with the T-Maxx or E-Maxx.