Align 150 Tail Boom

Usage for T-REX 150.

Specifications:
150 tail boom x 2(3.5x3.5x140mm)
150 Tail motor install x 2
Socket button head self screw x 2(T1.5x3mm)
Socket button head screw x 2(#0-80x3mm)

Frequently acquired with the thing that you are presently checking out.

150 Main Shaft

Usage for T-REX 150.

Specifications:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

Want one more fantastic thing to compliment the above discussed thing?

150 Landing Skid

Usage for T-REX 150.

Specifications:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Want one more fantastic thing to compliment the above discussed thing?

20 Tail Blade

Usage for T-REX 150.

Specifications:
Tail Blade x 4
Length:41.35 mm
Weight:Approximate 0.21g/single

This is a wonderful addition to the thing presently being talked about.

150 Vertical Stabilizer

Usage for T-REX 150.

Specifications:
Vertical Stabilizer x 2

Many others have acquired this thing in addition to the thing that you are presently checking out.

2S1P 7.4V 250mAh/30C

Usage for T-REX 150.

Instruction::
Max Constant Discharge: 30C. Typical operating temperature level is approx. 40-65?C(within 80% of rated discharge). Max. temperature level: 80?C.
Recommend to discharge the battery within 80% of rated discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and effectiveness will minimize due to high present, high temperature level and over-discharge)

KEEP IN MIND::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature level. Releasing capability cannot go beyond 80% of the max capability after complete charging to guarantee a good cycle performance.Recommend to complete charge a brand new battery before using and only discharge the battery 50% for very first 5 times to make a good effectiveness of the battery. Please make it a practice to constantly count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping using can not reduce than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or shop/ charge batteries at the temperature level up to 35℃ in a airtight vehicle. The environment high temperature level could cause the issue or the threat of burst. If the battery becomes hot while high present discharging or flying, please do not charge the battery immediately. Wait to cool off(about 20 minutes), then examine to charge. If versus follow the initial factory using rules, potentially cause the battery to inflate or any dangerous accident occurs.
Do not leave the charger is running ignored as it might cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:15g

Many others have acquired this thing in addition to the thing that you are presently checking out.

120 Main Blades-Black

Usage for T-REX 150.

Specifications:
Shape: In proportion wing
Length:120 mm
Weight:Approximate 5.8g/set

Devices:
Main Blades x 2 set
Main blade Decal x 1 set

Below is a fantastic thing that several others have purchased the very same time.

150 Feathering Shaft

Usage for T-REX 150.

Specifications:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)