Align 150 Vertical Stabilizer

Use for T-REX 150.

Specs:
Vertical Stabilizer x 2

Often bought with the item that you are presently reviewing.

150 Main Shaft

Use for T-REX 150.

Specs:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

You will enjoy this thing if you have the thing just above discussed.

150 Feathering Shaft

Use for T-REX 150.

Specs:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)

Numerous others have actually bought this item in addition to the item that you are presently reviewing.

78T Main Drive Gear

Use for T-REX 100S/100X/150.

Specs:
Main Drive Gear(78T) x 2

This is a wonderful addition to the item presently being reviewed.

20 Tail Blade

Use for T-REX 150.

Specs:
Tail Blade x 4
Length:41.35 mm
Weight:Approximate 0.21g/single

Numerous others have actually bought this item in addition to the item that you are presently reviewing.

150 Landing Skid

Use for T-REX 150.

Specs:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Often bought with the item that you are presently reviewing.

150 Tail Boom

Use for T-REX 150.

Specs:
150 tail boom x 2(3.5x3.5x140mm)
150 Tail motor install x 2
Socket button head self screw x 2(T1.5x3mm)
Socket button head screw x 2(#0-80x3mm)

This item praises the main item here.

2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Instruction::
Max Constant Discharge: 30C. Typical operating temperature is approx. 40-65?C(within 80% of ranked discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of ranked discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and performance will minimize due to high existing, high temperature and over-discharge)

NOTE::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capability can't surpass 80% of limit capability after full charging to make sure an excellent cycle performance.Recommend to full charge a brand brand-new battery before using and just release the battery 50% for very first 5 times to make an excellent performance of the battery. Please make it a practice to always count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunlight or shop/ charge batteries at the temperature as much as 35℃ in a airtight automobile. The environment high temperature might cause the damage or the danger of burst. If the battery ends up being hot while high existing discharging or flying, please do not charge the battery instantly. Wait to cool off(about 20 minutes), then examine to recharge. If against follow the initial factory using guidelines, potentially cause the battery to inflate or any unsafe accident occurs.
Do not leave the battery charger is running ignored as it might cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:15g

This is a wonderful addition to the item presently being reviewed.

150 Painted Canopy

Use for T-REX 150.

Specs:
150 Painted Canopy x 1
150 Canopy nut x 4