Align 120 Main Blades-Black

Usage for T-REX 150.

Specs:
Shape: Symmetrical wing
Length:120 mm
Weight:Approximate 5.8g/set

Devices:
Main Blades x 2 set
Main blade Decal x 1 set

Often purchased with the product that you are presently reviewing.

150 Landing Skid

Usage for T-REX 150.

Specs:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Get this product to boost the one you read around.

150 Main Shaft

Usage for T-REX 150.

Specs:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

Many others have purchased this product together with the product that you are presently reviewing.

150 Feathering Shaft

Usage for T-REX 150.

Specs:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)

Below is a great product that lots of others have purchased the very same time.

2S1P 7.4V 250mAh/30C

Usage for T-REX 150.

Guideline::
Max Constant Discharge: 30C. Normal operating temperature level is approx. 40-65?C(within 80% of rated discharge). Max. temperature level: 80?C.
Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will minimize due to high present, high temperature level and over-discharge)

KEEP IN MIND::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature level. Discharging capacity cannot exceed 80% of the max capacity after full charging to ensure an excellent cycle performance.Recommend to full charge a brand new battery prior to utilizing and only discharge the battery 50% for very first 5 times to make an excellent efficiency of the battery. Please make it a habit to constantly count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping utilizing can not reduce than 3.4V). Do not utilize the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature level up to 35℃ in a airtight car. The environment high temperature level could cause the damage or the threat of burst. If the battery ends up being hot while high present discharging or flying, please do not charge the battery instantly. Wait to cool down(about 20 mins), then examine to recharge. If against follow the original factory utilizing rules, possibly cause the battery to inflate or any hazardous accident takes place.
Do not leave the battery charger is running unattended as it may cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:15g

Below is a great product that lots of others have purchased the very same time.

20 Tail Blade

Usage for T-REX 150.

Specs:
Tail Blade x 4
Length:41.35 mm
Weight:Approximate 0.21g/single

Below is an additional product that praises the product being discussed.

DS150/155 Servo Gear Set

Usage for ALIGN DS150/155 Servo.

Specs:
DS150/155 gear G1x1
DS150/155 gear G2x1
DS150/155 gear G3x1
DS150/155 gear G4x1
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)