Traxxas Bumper, Front/ Slash

This is the Front Bumper and Mount for the
Traxxas Slash 1/10 2WD Short Course Racing Truck.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Front Bumper and bumper mount

REQUIRES:
Setup on the Traxxas Slash

Right here is a fantastic product that many others have actually purchased the exact same time.

Bumper, Rear/ Slash

This is the Back Bumper and Mount for the
Traxxas Slash 1/10 2WD Short Course Racing Truck.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Back Bumper and bumper mount

REQUIRES:
Setup on the Traxxas Slash

Get this product to improve the one you read around.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design gets rid of the possiblility of reverse polarity
connections
Offers a safe connection for battery and motor connections

CONSISTS OF:
Two 2-Pin Male Ultra Plug
Four brief pieces of Black diminish tubing

REQUIRES:
Soldering to wire
Soldering Iron, HCAR0775

COMMENTS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

This product is often purchased with the above stated product.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Set for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Reduces the chassis 1" (25.4mm) for better handling and higher
    catching speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Directions

Right here is a fantastic product that many others have actually purchased the exact same time.

Body Mounts Front & Rear

These are the replacement body installs for the Traxxas Stampede truck. They
are built of black plastic and are the posts that the lexan truck body
connects to.

PACKAGE
CONSISTS OF:
One front body mount
One rear body mount

COMMENTS:
Does not consist of body clips

Regularly purchased with the product that you are presently checking out.

Wheelie Bar Mnt Stamp/Rust/Bandit

    This is an optional Wheelie Bar Mount for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at rear of chassis to hold wheelie bar arm and wheels in
    place

CONSISTS OF:
Put together optional Wheelie Bar Mount with mounting instructions and
    hardware

REQUIRES:
Wheelie Bar Arm (TRAC9574)
Wheels and Axles (TRAC9576)

Right here is a fantastic product that many others have actually purchased the exact same time.

Chassis, Slash

This is the Gray Nylon Chassis for the 2WD Traxxas Slash.

FEATURES:
Gray composite nylon construction

CONSISTS OF:
One chassis for the Traxxas Slash

REQUIRES:
Installing all elements onto the chassis

SPECS:
Length: 338mm (13.3")
Width: 189mm (7.44")
Height: 23mm (0.91")
Thickness: 0.08" (2mm)

Right here is one more product that praises the product being talked about.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two front 39mm (69mm center to center) turnbuckles and instruction
    sheet

REQUIRES:
Setup on the vehicle