Traxxas 59Mm Turnbuckles Toe Link (2) (Assembled W/ Rod En Ds And Ho

These are the Traxxas 59mm Turnbuckle Toe Links
for the Traxxas Rustler, Stampede and Bandit VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
2 59mm (78mm center to center) turnbuckles

NEEDS:
Setup on the vehicle

Lots of others have acquired this thing along with the thing that you are currently checking out.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Below is a fantastic thing that many others have bought at the same time.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
2 front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Setup on the vehicle

Want an additional fantastic thing to match the above mentioned thing?

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

Below is an additional thing that compliments the thing being talked about.

3 X 12Mm Button Head Hex Screw

These are 3x12mm Button Head Screws from Traxxas

FUNCTIONS:
Steel Construction
Black in color
Hex head

INCLUDES:
6 button head screws

SPECS:
Length: 12mm (.47")
Diameter: 3mm (.12")

COMMENTS:
These can be usage with different application.

Want an additional fantastic thing to match the above mentioned thing?

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
2 61mm (96mm center to center) turnbuckles

NEEDS:
Setup on the vehicle

You will love this thing if you have the thing just above pointed out.

3.0Mm X 15 Socket Head Cap Screws (4/Pkg)

These are 3x15mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

INCLUDES:
Four screws

NEEDS:
2.5mm allen wrench

SPECS:
Length: 15mm
Diameter: 3mm

Want an additional fantastic thing to match the above mentioned thing?

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, black in color
Direct fit hop-up needs no design adjustment for installation

INCLUDES:
2 Front A-Arms

NEEDS:
Setup following the design manual

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at widest

COMMENTS:
For the blue version of this part order RPMC8246

Get this thing to boost the one you are reading around.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks install to the front A-arms and is exactly what the
guiding knuckles attach to.

FEATURES:
Nylon building and construction, black in color
Stamped right and delegated guarantee proper installation

INCLUDES:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and guiding knuckles

This thing compliments the above talked about thing.

RC Screwz Traxxas Slash Stainless Steel Screw Kit

This is an optional RC Screwz Screw Set for the 2WD Traxxas Slash.

FEATURES:
Stainless steel screws replace all stock screws, locknuts and
    washers

INCLUDES:
One Case including all replacement screws for the Traxxas Slash