Traxxas Bumper, Rear/ Slash

This is the Back Bumper and Mount for the
Traxxas Slash 1/10 2WD Short Course Racing Truck.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Back Bumper and bumper install

REQUIRES:
Installation on the Traxxas Slash

The below product likewise pairs really well with the product being gone over.

Bumper, Front/ Slash

This is the Front Bumper and Mount for the
Traxxas Slash 1/10 2WD Short Course Racing Truck.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Front Bumper and bumper install

REQUIRES:
Installation on the Traxxas Slash

Lots of others have purchased this product along with the product that you are currently reviewing.

Wheelie Bar Mnt Stamp/Rust/Bandit

    This is an optional Wheelie Bar Mount for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to hold wheelie bar arm and wheels in
    place

CONSISTS OF:
Assembled optional Wheelie Bar Mount with mounting guidelines and
    hardware

REQUIRES:
Wheelie Bar Arm (TRAC9574)
Wheels and Axles (TRAC9576)

Frequently purchased with the product that you are currently reviewing.

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Gear for models
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Developed for models with a slipper clutch
Black plastic building

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 90

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 86T gear (TRAC4686).

Right here is an additional product that praises the product being gone over.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FUNCTIONS:
Fiberglass Building

CONSISTS OF:
One Tie Bar

REQUIRES:
Suspension Pins (TRAC4940)

SPECS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Thickness: 2.0 mm (0.082")

REMARKS:
None

Right here is an additional product that praises the product being gone over.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo monster truck, can also be utilized in any
    application where a 3x15mm button head screw is needed

CONSISTS OF:
6 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

Right here is a great product that several others have purchased the same time.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a wide variety of bodies
    to be utilized including rally automobile bodies
Constructed of nylon, black in color
Screw-on body install system eliminates metal clips

CONSISTS OF:
Front and Rear Body Mounts and Publishes with Installing Hardware

Lots of others have purchased this product along with the product that you are currently reviewing.

Black Esc Cage For Castle Sidewinder 3 & Sidewinder Sct Escs

This is the RPM ESC Cage for Castle Sidewinder 3
and Sidewinder SCT Electronic Speed Controls.

FEATURES:
Constructed of engineering grade nylon, black in color
Fits the following Castle Creations ESCs;
    010-0115-00, 010-0115-01, 010-0115-02, 010-0115-03, 010-0115-04
    010-0123-00
Allows ESC to be run with or without a fan
Fastens to chassis with 2 screws, whole assembly can be transfered
    from one vehicle to the next in about a minute
Separate switch install bolts to cage, or may be mounted anywhere by
    2 2mm holes
Fits the following Traxxas cars;
    Slash 2WD
    Slash 2wd LCG
    Slash 4×4,
    Slash 4×4 LCG
    Stampede 4x4
    Rally
Fits the following Traxxas cars when the Traxxas #3725 Installing
    Plate is utilized;
    Rustler XL-5
    Stampede XL-5
    Bandit XL-5

CONSISTS OF:
Unassembled ESC Cage with Hardware and Instruction Sheet
Separate On/Off Change Mount