Traxxas Alum Stub Axle Carriers Blue (2)

This is the optional Aluminum Rear Stub Axle Housing for the
Traxxas Rustler, Stampede, and Bandit.

FEATURES:
6061-T6 Aluminum Building
Anodized Blue in Color

INCLUDES:
2 Aluminum Rear Stub Axles
Four 5x11mm Bearings

NEEDS:
Setup into Automobile

Here is a wonderful product that numerous others have actually purchased the exact same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for designs with a slipper clutch.
Black plastic construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Several others have actually acquired this product along with the product that you are currently reviewing.

Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum construction, coated
Anodized black with white springs
Completely assembled

INCLUDES:
Four fully assembled shocks with white springs
Mounting hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the design

Here is another product that compliments the product being gone over.

Camber Turnbuckle Set Blue Fits Rustler/Stampede

This is the optional Aluminum Turnbuckle set for the
Traxxas, Rustler and Stampede.

FEATURES:
Anodized aluminum construction, blue in color
Black nylon ball ends

INCLUDES:
2 39mm front camber links
2 49mm back camber links
Links are assembled with rod ends and hollow balls
One blue 5mm aluminum wrench

NEEDS:
Setup onto vehicle

This product compliments the above gone over product.

Caster Block Blue Aluminum Stampede Rustler

    This is a set of optional 30 Degree Blue Caster Blocks
for the Traxxas Rustler and Stampede.

FEATURES:
Anodized aluminum construction
Blue in color
30 degree

INCLUDES:
One left and ideal 30 degree blue anodized aluminum caster blocks

NEEDS:
Setup on the vehicle

Here is another product that compliments the product being gone over.



This is the ST Racing Principles Aluminum Front Bulkhead
For the Traxxas Electric Stampede, Rustler, Bandit, or Slash 1/10 automobiles
and Nitro Slash.

FEATURES:
Made from aluminum, anodized blue in color

INCLUDES:
One bulkhead
2 M30x14mm Phillips head screws

SPECIFICATIONS:
Length: 2-7/8" (73mm)
Width: 1-3/32" (281mm)
Height: 1-17/32" (39mm)

REMARKS:
This bulkhead can be installed on Traxxas Stampede 4X4 VXL 2.4GHz RTR
Traxxas Stampede 4X4 VXL 2.4GHz RTR
Traxxas Stampede XL-5 2WD RTR w/7C Battery & Battery charger
Traxxas Rustler VXL 2.4GHz RTR
Traxxas Rustler XL-5 2WD RTR
Traxxas Bandit VXL 2.4GHz RTR, Traxxas Bandit Extreme
Traxxas Bandit Extreme Sports XL-5 RTR
Traxxas Slash 4X4 VXL TQi/2.4GHz RTR
Traxxas Slash 2WD TQi 2.4GHz RTR
Traxxas Slash 4X4 Ultimate VXL TQi RTR
Traxxas Slash F-150 SVT Raptor 2WD TQi
Traxxas Nitro Slash

This product compliments the main item below.



This is the Racers Edge 7.4V 5200mAh TWO 30C Hard-Wired LiPo Battery with a Traxxas Connector included.

Specifications
Battery Type:LiPo
Cell #:2S, 7.4V
Capability:5200mah
C-Rating:30C
Connector:Traxxas HC