RPM Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Black

This is the optional Rear Bumper Mount from RPM for usage on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
Three 3x25mm Screws
One 3mm Locknut
Two RPM Decals

REQUIRES:
Setup on the vehicle
2mm Allen Motorist for Setup

The listed below item also sets truly well with the item being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Below is one more item that praises the item being discussed.

Rear Bumper, For Traxxas Slash 2Wd, Black

This is the optional RPM Rear Bumper for usage on the Traxxas Slash.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Left Side Bumper Assistance
One Right Side Bumper Assistance
One Rear Bumper
Eight 3x16mm Buttonhead Screws

REQUIRES:
Setup on the vehicle

COMMENTS:
Also readily available in:
Blue (RPMC0082)
Chrome (RPMC0081)

Below is a fantastic item that many others have bought at the very same time.

Rear Skid Plate, For Slash, Black

This is the optional RPM Rear Skid Plate for usage on the
Traxxas 2WD Slash.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Rear Skid Plate
One 3x12mm Button Head Screw

REQUIRES:
Setup on the vehicle

COMMENTS:
Need to be used with Rear Bumper Mount (RPMC0150) or (RPMC0151)
Also readily available in Blue (RPMC1001) and Gray (RPMC1002)

Below is one more item that praises the item being discussed.

Low Visibility Wheelie Bars, For Traxxas Slash 2Wd & Slash 4X4

These are the optional RPM Low Visibility Wheelie Bars
for the Traxxas Slash 2WD and Slash 4x4.

**Only works with RPM Rear Bumper, does not work with stock Traxxas Bumper.**

FUNCTIONS:
Solidified plastic building and construction
Prevents vehicle from turning over in reverse during tough
    velocity

CONSISTS OF:
Wheelie Bar Assembly with Mounting Hardware and Recommendations

The listed below item also sets truly well with the item being discussed.

Mud Flaps, For Slash Bumper

These are the RPM Mud Flaps for usage on the
RPM Bumpers created for the Traxxas Slash.

FEATURES:
Rubber building and construction
Black in color

CONSISTS OF:
Two Mud Flaps
Two Assistance Arms
Two Screw Supports
Four 3x10mm Buttonhead Screws
Four 3x16mm Buttonhead Screws
Instruction Sheet

REQUIRES:
Setup on the vehicle

COMMENTS:
Works just with the following Bumpers:
RPM Rear Bumper Black Slash (RPMC0080)
RPM Rear Bumper Chrome Slash (RPMC0081)
RPM Rear Bumper Blue Slash (RPMC0082)

Want one more fantastic item to match the above discussed item?

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Front bearing (hub) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

This item praises the above discussed item.

Body Washers (8)

This is the Traxxas replacement Body Washers.

FEATURES:
Nylon building and construction
Assists avoid the body mount hole from splitting prematurely
White in color

SPECS:
Outer Diameter: 0.87" (22mm)
Inner Diameter: 0.26" (6.7mm)

CONSISTS OF:
Eight large body mount washers