Traxxas Body Washers (8)

This is the Traxxas replacement Body Washers.

FEATURES:
Nylon construction
Helps prevent the body mount hole from splitting prematurely
White in color

SPECIFICATIONS:
Outer Size: 0.87" (22mm)
Inner Size: 0.26" (6.7mm)

CONSISTS OF:
8 big body mount washers

Many others have bought this item in addition to the item that you are presently reading about.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel construction
Natural sleek color

CONSISTS OF:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

Here is a great item that several others have bought at the exact same time.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be used on Traxxas or most other brand names of cars.

FEATURES:
Metal clips are silver in color

CONSISTS OF:
Twelve body clips

SPECIFICATIONS:
Length: aprrox. 7/8"

Want an additional great item to match the above pointed out item?

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Metal Building
Silver in Color
Bent for Easy Elimination

CONSISTS OF:
Ten Bent Silver Metal Body Clips

NEEDS:
Assembly onto Vehicle

Here is an additional item that compliments the item being discussed.

Diff Output Yokes Heavy Duty (2) Stampede 4X4

These are the Traxxas Heavy Duty Differential Output Yokes.

FEATURES:
Fits the Traxxas Stampede 4x4, Telluride 4x4, Slash 2WD

Black plastic construction

CONSISTS OF:
2 Ouput Yokes
2 Screw Pins

Want an additional great item to match the above pointed out item?

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on automobile

You will certainly love this item if you have the item above mentioned.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for designs with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Want an additional great item to match the above pointed out item?

13T Pinion Gear 32P

This is a 13 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the equipment which is attached directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

CONSISTS OF:
One 13 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This equipment is just one of two which are used on the E-Maxx double motor
    set-up.

Get this item to improve the one you read about.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for use with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

CONSISTS OF:
One differential ring equipment
One pinion equipment

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This item compliments the above discussed item.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93