RPM Mud Flaps, For Slash Bumper

These are the RPM Mud Flaps for usage on the
RPM Bumpers designed for the Traxxas Slash.

FEATURES:
Rubber building
Black in color

CONSISTS OF:
Two Mud Flaps
Two Assistance Arms
Two Screw Supports
Four 3x10mm Buttonhead Screws
Four 3x16mm Buttonhead Screws
Guideline Sheet

NEEDS:
Setup on the vehicle

COMMENTS:
Functions just with the following Bumpers:
RPM Back Bumper Black Slash (RPMC0080)
RPM Back Bumper Chrome Slash (RPMC0081)
RPM Back Bumper Blue Slash (RPMC0082)

Several others have bought this thing in addition to the thing that you are presently checking out.

Traxxas Slash 4X4 Rear Bumper-Black

This is the optional RPM Back Bumper for usage on the Traxxas Slash 4X4.
Will NOT work with the Slash 2WD.

FUNCTIONS:
Nylon building
Black in color

CONSISTS OF:
One Left Side Bumper Assistance
One Right Side Bumper Assistance
One Rear Bumper
Eight 3x16mm Buttonhead Screws
One Upper Bumper Mount
One Lower Bumper Mount

NEEDS:
Setup on the vehicle

COMMENTS:
Also offered in: Chrome (RPMC0123)
Blue (RPMC0125)

Want an additional fantastic thing to compliment the above pointed out thing?

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

COMMENTS:
Also offered in Blue (RPMC0705)

This thing is often bought with the above pointed out thing.

Rear Bumper, For Traxxas Slash 2Wd, Black

This is the optional RPM Back Bumper for usage on the Traxxas Slash.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Left Side Bumper Assistance
One Right Side Bumper Assistance
One Rear Bumper
Eight 3x16mm Buttonhead Screws

NEEDS:
Setup on the vehicle

COMMENTS:
Also offered in:
Blue (RPMC0082)
Chrome (RPMC0081)

Want an additional fantastic thing to compliment the above pointed out thing?

Low Visibility Wheelie Bars, For Traxxas Slash 2Wd & Slash 4X4

These are the optional RPM Low Visibility Wheelie Bars
for the Traxxas Slash 2WD and Slash 4x4.

**Just works with RPM Back Bumper, does not work with stock Traxxas Bumper.**

FUNCTIONS:
Hardened plastic building
Avoids vehicle from turning over in reverse during tough
    acceleration

CONSISTS OF:
Wheelie Bar Assembly with Mounting Hardware and Recommendations

This thing praises the above discussed thing.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs permit a variety of bodies
    to be utilized consisting of rally vehicle bodies
Constructed of nylon, black in color
Screw-on body install system removes metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts with Mounting Hardware

This thing is often bought with the above pointed out thing.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Blue in color
Plastic constrution

CONSISTS OF:
(2) Front/Rear A-Arms

NEEDS:
Setup on front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

COMMENTS:
Also offered in Black (RPMC0702)