Hot Racing Sealed Aluminum Differential Case For Traxxas 2Wd Electric

This is the optional Hot-Racing Aluminum Differential Case
for the Traxxas Outlaw, Rustler, 2WD Stampede, 2WD Slash
and Beast Jam Vehicles

FUNCTIONS:
CNC aluminum construction diff case, black in color
Solidified steel equipment
Sealed differentials enables tuning to track conditions by changing
    weight of diff oil
Four O-rings assist seal against fluid leakage
Thirty day restricted service warranty starting at date of purchase- valid
    in the United States only

CONSISTS OF:
Sealed Differential Case
Four O-Rings
2 Screws

SPECS:
Outside Size: 1.48" (37.5mm)
Shaft Size: .200" (5.10mm)
Overall Thickness: 0834" (21.2mm)

Below is a great product that lots of others have bought at the exact same time.

Planet Gears & Shafts

These are the replacement planetary equipment and shafts for the Rad 2 and Hawk 2.

FUNCTIONS:
All these gears and shafts are made of metal(most likely with a low
quantity of steel).

CONSISTS OF:
4- planetary gears
4- planteary equipment shafts
2- sun gears
1- sun equipment alignment shaft

WAJ
1/16/94

Below is a great product that lots of others have bought at the exact same time.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel construction
_
Roll pin pre-installed

CONSISTS OF:
One slipper clutch set

SPECS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

COMMENTS:
This part will fit both the requirement and XL version of the Rustler
or Stampede.

Frequently bought with the product that you are currently reviewing.

Composite Gear Case With Aluminum Motor Plate

This is the Hot Racing Composite Gear Case with Aluminum Motor Plate
for the Traxxas 1/10 Outlaw, Rustler, 2WD Stampede, and 2WD Slash.

FEATURES:
Light weight carbon fiber composite transmission case
Longer motor installing slots for more equipment ratio combinations
CNC 6061 aluminum motor plate, heat sink and arm mount
Larger open area for a larger motor heat sink
Thirty day restricted service warranty starting at date of purchase-valid
    in the United States only

CONSISTS OF:
Transmission Case with Heat Sink Motor Plate and Arm Mount

Lots of others have bought this product along with the product that you are currently reviewing.

Silicone Diff Fluid 60,000 Cst, 2Oz

This is the Factory Team 60,000cst Diff Fluid from Associated.
This can be used in any application that requires diff fluid.

FEATURES:
Customized blend silicone
Clear liquid
Bottle consists of 2oz (59ml) of fluid

CONSISTS OF:
One 2oz (59ml) bottle of 60,000cst diff fluid

Lots of others have bought this product along with the product that you are currently reviewing.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
2 Front bearing (hub) providers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if required use (2) DTXC1547.

This product praises the main item right here.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on vehicle

Get this product to enhance the one you are reading about.

Oil Differential 500K Weight

    This is the 500K Weight Differential Oil from Traxxas.

FEATURES:
Oils differential
Clear in color
500K weight

CONSISTS OF:
One .70oz (20cc) Bottle Of 500K Diff Lube

REQUIRES:
Application to differential