Traxxas Rebuild Kit Hd Slipper Clutch

This is the Strong Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Elements for both nitro and electrical Revo and Maxx trucks

SUCHES AS:
Three Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

Right here is a fantastic item that many others have bought at the exact same time.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum building and construction

SUCHES AS:
One slipper pressure plate
One slipper center

REQUIRES:
Installation onto vehicle.

This item is frequently acquired with the above discussed item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the above gone over item.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Equipment
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

SUCHES AS:
One 68T 0.8 metric pitch spur equipment

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Diameter: 2.16" (55mm)
Thickness: .23" (6mm)

You will certainly like this product if you have the product previously discussed.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Equipment
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

SUCHES AS:
One 65T 0.8 metric pitch spur equipment

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Diameter: 2.12" (54mm)
Thickness: .23" (6mm)

This item is frequently acquired with the above discussed item.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building and construction
Steel 10x15x4mm ball bearing with blue rubber seal
Used on slipper shaft

SUCHES AS:
One aluminum adapter
One 10x15x4mm ball bearing

REQUIRES:
Installation on to slipper shaft
Remaining clutch pieces

Want an additional fantastic item to enhance the above discussed item?



This is a set of Pro-Line Badlands 2.8" All Surface Tires
mounted on Black Desperado Wheels.

FEATURES:
Fits the front of the 2WD Traxxas Stampede and Rustler, the back of
    the 2WD Jato, Stampede and Rustler and the front and back of the
    Traxxas Stampede 4x4
Wheels built of nylon with a molded-in beadlock ring for scale
    appearance, six spoke design
M2 medium substance Badlands 2.8" tires have motorcross design tread
    with oversize lugs for optimum efficiency in all terrain
    conditions

SUCHES AS:
2 Pro-Line Desperado 2.8" Front Wheels in Black with Badlands M2
    Tires and Foam Inserts

SPECIFICATIONS:
Diameter: 4.95" (126mm)
Width: 2.10" (53mm)

This item compliments the above gone over item.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
6 black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Diameter: 3mm

REMARKS:
These may likewise be referred to as coverplate screws.