Traxxas Driveshaft Assembly (1) Left

This is the Driveshaft Assembly for use on the
Traxxas 1/16 E-Revo VXL.

FEATURES:
Nylon building and construction
Black in color
Fits left or ideal

CONSISTS OF:
One Fully Put together Driveshaft Assembly

REQUIRES:
Installation on the car

This thing praises the above discussed thing.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Diff Ring Gear
One Pinion Gear

REQUIRES:
Installation on the car

This thing praises the above discussed thing.

Half Shafts, Left Or Right (1/

These are the Left or Right Half Shafts for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Two Internal Splined Half Shafts
Two External Splined Half Shafts
4 Metal U-Joints

REQUIRES:
Installation on the car

This thing is often purchased with the above stated thing.

Door, Battery Compartment (1)/

This is the Battery Compartment Door and Vents for use on
the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Battery Compartment Door
Two Vents

REQUIRES:
Installation on the car

Regularly purchased with the thing that you are presently reading about.

Pivot Balls (4)/ Pivot Ball Ca

These are the Pivot Balls and Pivot Ball Caps for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel constructed pivot balls
Black nylon pivot ball caps

CONSISTS OF:
4 Pivot Balls
4 Pivot Ball Caps

REQUIRES:
Installation on the car's suspension

Regularly purchased with the thing that you are presently reading about.

Wheel Hubs, Hex (4)/ Axle Pins

    These are the Wheel Hubs and Axle Pins for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
4 Wheel Hubs
4 1.5x8mm Axle Pins

REQUIRES:
Installation on the car

SPECS:
Hex Size: 12mm

This thing is often purchased with the above stated thing.

Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Installation on the car

SPECS:
Outer Size: 12mm (0.47")
Inner Size: 8mm (0.31")
Width: 3.5mm (0.14")

Below is a terrific thing that numerous others have actually bought at the same time.

Toe Link, Front & Rear (Molded

These are the Front and Rear Toe Links for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Red in color

CONSISTS OF:
4 Front/Rear Toe Links
Eight Hollow Balls

REQUIRES:
Installation on the car

SPECS:
Length: 86mm (3.4")
Size: 5mm (0.20")

Want an additional terrific thing to compliment the above stated thing?

Rocker Arm Set, Progressive-2/

This is the Progressive-2 Rocker Arm Post Set for use on the
Traxxas 1/16 scale E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Nylon building and construction
Grey in color

CONSISTS OF:
Two Back Rocker Arm Posts
Two Front Rocker Arm Posts
Eight Nylon Bearings

REQUIRES:
Installation on the car

Want an additional terrific thing to compliment the above stated thing?

Gear Set (For 2080 Micro Water

This is the Servo Gear Set for use on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FEATURES:
Nylon building and construction
Grey in color

CONSISTS OF:
One Output Gear
One Leading Reduction Gear
One Center Reduction Gear
One Bottom Reduction Gear
Direction sheet

REQUIRES:
Installation on the servo