Traxxas Motor Heat Sink

This is the original replacement motor heatsink for the Traxxas Bad guy IV.
AXY
4/8/92

Numerous others have bought this item together with the item that you are presently reading about.

Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Simple setup needs just snapping the fan housing on the
ESC and plugging in the adapter on the ESC to the fan

CONSISTS OF:
One Cooling Fan Device with setup sheet

NEEDS:
Installation following the included directions

SPECS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) consisting of clips - .47" (12mm) not consisting of clips

Here is a great item that many others have bought at the very same time.

Tqi 2.4Ghz 5-Channel Micro Receiver (W/ Telemetry)

This is the Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry.

FEATURES:
Compatible with all Traxxas designs that consist of the TQi telemetry
    system
May also be used with all current Traxxas TQ 2.4GHz transmitters
    with black cases and satin chrome or black wheel

CONSISTS OF:
Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry

SPECS:
Measurements: 1.5 x 1.02 x 0.43" (38 x 26 x 11mm)
Weight: 0.35oz (10g)

You will like this thing if you have the thing previously pointed out.

Cc Blower 15 Series For 1/8 Motors

This is the Motor Cooling Blower Fan and Shroud from Castle Creations.

FEATURES:
Fits motors with outside size between 1-1/2 and 1-7/8"
    (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650
Connecteds into receiver and drops motor temperature level as much as 30°
One year minimal warranty through manufacturer start at date of
    purchase

CONSISTS OF:
Fan with wire and adapter, shroud and 2 zip ties

NEEDS:
Connecting to motor can and plugging into receiver

SPECS:
Length: 49mm
Width: 44.5mm
Height: 44.5mm
Wire Length: (9.5")

You will like this thing if you have the thing previously pointed out.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs permit a wide variety of bodies
    to be used consisting of rally vehicle bodies
Constructed of nylon, black in color
Screw-on body mount system removes metal clips

CONSISTS OF:
Front and Rear Body Mounts and Publishes with Mounting Hardware

Numerous others have bought this item together with the item that you are presently reading about.



This is a pair of Pro-Line Masher M2 2.8" All Surface Front or Rear Tires
installed to Black Desperado Wheels.

FEATURES:
Fits the back of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electrical Stampede and Rustler
front and back of the Stampede 4x4
Chevron style tread for good traction on rough surface
Side tread has a hook design that craters the dirt for excellent
    side traction
M2 (soft) compound
Nylon building and construction 6 spoke wheel with molded-in beadlock ring

CONSISTS OF:
2 Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECS:
Wheel Diameter: 2.8" (71mm)
General Diameter: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm