Traxxas Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Hyperlinks
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

SUCHES AS:
2 61mm (96mm center to center) turnbuckles

NEEDS:
Installation on the automobile

Want another terrific item to enhance the above pointed out item?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

SUCHES AS:
2 rear 49mm (82mm center to center) turnbuckles

NEEDS:
Installation on the automobile

This item praises the above gone over item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This item praises the above gone over item.



This is an optional Pro-Line ProTrac Suspension Kit Back Arms
for use on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon building and construction, black in color
Boosts forward acceleration, corner speed, consistency and
    drivability

SUCHES AS:
2 rear arms
One Proline decal

NEEDS:
Installation onto automobile

Regularly acquired with the item that you are currently reading about.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends
Can be Utilized on Front or Back

SUCHES AS:
2 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

NEEDS:
Assembly onto Vehicle

Get this item to enhance the one you read about.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

SUCHES AS:
2 front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Installation on the automobile

Here is another item that praises the item being gone over.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

SUCHES AS:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on automobile

Many others have acquired this item along with the item that you are currently reading about.

Large Servo Saver

This is a big servo saver that can be used in Traxxas vehicles or any automobile that
needs a big design servo saver.
FEATURES:
Hard white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that permit you to mount the saver
on most popular servos consisting of: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise suched as is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for installing the steering linkages.

This item is regularly acquired with the above pointed out item.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93