Traxxas Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic construction
Black in color

INCLUDES:
Two steering obstructs

NEEDS:
Setup on guiding assembly

SPECS:
Length: 35mm (1.38")
Width: 32mm (1.26")

You will like this product if you have the product previously pointed out.

Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic construction
Black in color

INCLUDES:
One left caster block
One right caster block

NEEDS:
Setup on Slash

SPECS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

Get this thing to improve the one you are reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Want one more fantastic thing to match the above stated thing?

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

NEEDS:
Assembly to automobile

SPECS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one needed).

Frequently purchased with the thing that you are currently checking out.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

INCLUDES:
Front driveshaft assembly
Screw pin

NEEDS:
Setup on automobile

Right here is one more thing that compliments the thing being talked about.

Stub Axle Housing (2)

These are the axle real estates (or hub carriers) utilized on the: Rad 2, Hawk 2,
Eagle, Blue Eagle LS II and Nitro Rustler. The real estates are formed of
black nylon.

Includes: 2 axle real estates

pcd 01/23/94

Right here is a fantastic thing that several others have bought at the same time.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on automobile

The below thing likewise sets truly well with the thing being talked about.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas cars
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum construction

INCLUDES:
Two hex hubs
Four axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

COMMENTS:
These hubs could be utilized with other cars making use of the same
    pin/hex design. These hubs Will Not deal with the T-Maxx or E-Maxx.

This thing is regularly purchased with the above stated thing.

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two rear 49mm (82mm center to center) turnbuckles

NEEDS:
Setup on the automobile

This thing is regularly purchased with the above stated thing.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Setup on the automobile